MDM-9PH003B
Share:

ITT Cannon, LLC MDM-9PH003B

Part Number:
MDM-9PH003B
Manufacturer:
ITT Cannon, LLC
Ventron No:
50348-MDM-9PH003B
Description:
MICRO-D 9POS PIN 18" WIRE
ECAD Model:
Datasheet:
Microminiature Catalog
Payment:
Payment
Delivery:
Delivery

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
ITT Cannon, LLC MDM-9PH003B technical specifications, attributes, parameters and parts with similar specifications to ITT Cannon, LLC MDM-9PH003B.
  • Factory Lead Time
    15 Weeks
  • Contact Material

    Contact Material refers to the material used to make the electrical contacts in a component. It determines the electrical conductivity, durability, and resistance to corrosion and wear of the contacts. Common contact materials include copper, silver, gold, and alloys of these metals. The choice of contact material depends on the specific application and the required performance characteristics.

    COPPER ALLOY
  • Insulation Material
    GLASS FILLED DIALLYL PHTHALATE
  • Packaging
    Bulk
  • Published
    2006
  • Series

    Series, in the context of electronic components, refers to the arrangement of components in a circuit. When components are connected in series, they form a single path for current to flow through. The total resistance of a series circuit is the sum of the individual resistances of each component. Series connections are often used to control the flow of current in a circuit, as the total resistance can be adjusted by changing the number or type of components in the series.

    MDM
  • JESD-609 Code
    e4
  • Part Status

    Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

    Active
  • Moisture Sensitivity Level (MSL)

    Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

    Not Applicable
  • Termination

    Termination refers to the electrical characteristics of a component or circuit at its input or output terminals. It describes how the component or circuit interacts with external signals or devices. Termination can involve matching impedance, providing voltage or current regulation, or filtering unwanted signals. Proper termination ensures efficient signal transfer, minimizes reflections, and prevents damage to components. It is crucial for maintaining signal integrity and optimizing circuit performance.

    Crimp
  • Connector Type

    Connector Type refers to the physical interface used to connect an electronic component to other devices or systems. It specifies the shape, size, pin configuration, and mating mechanism of the connector. Common connector types include USB, HDMI, Ethernet, and power connectors. The choice of connector type depends on factors such as signal type, data rate, power requirements, and environmental conditions.

    D-Sub
  • Number of Positions

    Number of Positions, in the context of electronic components, refers to the number of distinct terminals or connection points available on the component. It indicates the number of individual electrical connections that can be made to the component. A higher number of positions typically allows for more complex functionality and versatility in circuit design.

    9
  • Max Operating Temperature
    125°C
  • Min Operating Temperature
    -55°C
  • Color
    Multiple, Individual
  • Number of Rows
    2
  • Gender
    Male
  • Additional Feature
    NO HARDWARE, STANDARD
  • Subcategory
    D Type Connectors
  • Total Number of Contacts
    9
  • Shell Finish
    CADMIUM/YELLOW CHROMATE
  • Contact Finish
    Gold
  • Reliability
    COMMERCIAL
  • Body Breadth
    0.308 inch
  • Body Depth
    0.23 inch
  • Rated Current (Signal)
    3A
  • Contact Style
    Pin
  • Contact Resistance

    Contact resistance is the electrical resistance between two electrical contacts. It is caused by the imperfect contact between the two surfaces, which results in a small amount of resistance to the flow of current. Contact resistance can be a significant factor in the performance of electrical circuits, especially in high-power applications. It can cause power loss, heating, and even damage to components.

    8mOhm
  • Insulation Resistance

    Insulation Resistance is a measure of the resistance of an insulating material to the flow of electric current. It is typically measured in megaohms (MΩ) or gigohms (GΩ). A high insulation resistance indicates that the material is a good insulator, while a low insulation resistance indicates that the material is a poor insulator. Insulation resistance is important for preventing electrical leakage and ensuring the safe operation of electrical equipment.

    5000000000Ohm
  • Mating Contact Pitch
    0.05 inch
  • Max Current Rating
    3A
  • Dielectric Withstanding Voltage
    600VAC V
  • Cable Length
    457mm
  • Wire/Cable Gauge
    26 AWG
  • Contact Pattern
    STAGGERED
  • Insertion Force-Max
    2.224 N
  • Mating Contact Row Spacing
    0.1 inch
  • 1st Connector
    Receptacle, Male Pins
  • 2nd Connector
    Individual Wire Leads
  • Connector Type A
    D-Sub, Receptacle
  • Connector Type B
    Wire Leads
  • Contact Design
    PREASSEM CONN
  • Length

    Length, in the context of electronic components, refers to the physical dimension of a component along its longest axis. It is typically measured in millimeters (mm) or inches (in). Length is a crucial parameter for determining the physical size and space requirements of a component on a printed circuit board (PCB) or other assembly. It also affects the component's electrical characteristics, such as inductance and capacitance, which can be influenced by the length of conductors or traces within the component.

    1.50' 457.20mm
  • REACH SVHC
    No SVHC
  • RoHS Status
    Non-RoHS Compliant
Description
MDM-9PH003B Overview
This product is manufactured by ITT Cannon, LLC and belongs to the category of D-Sub Cables. The images we provide are for reference only, for detailed product information please see specification sheet MDM-9PH003B or the datasheet in PDF format. As a professional electronic components distributor, Ventron has five million electronic components available. Additionally, we have over 500,000 electronic components in stock ready for immediate shipment. If you have requirements, you can send us a quotation form to get the price of MDM-9PH003B. We attach great importance to our customers' purchasing experience and are willing to establish a long-term cooperative relationship with you. If you have any questions or requirements, please feel free to contact us.
MDM-9PH003B More Descriptions
Conn Micro D-Subminiature PIN 9 POS Crimp ST Cable Mount 9 Terminal 1 Port
Cable Assembly Hook-up Wire 0.457m 26AWG Micro D-Sub 9 POS PIN Crimp
MICRO D CONN, PLUG, 9POS, CRIMP; No. of Contacts: 9Contacts; Gender: Plug; Product Range: MDM Series; Contact Termination Type: Crimp; Connector Mounting: Cable Mount; Contact Plating: Gold Plated Contacts; Contact Material: Copper Alloy; SVHC: No SVHC (20-Jun-2016); D Sub Connector Type: Micro D
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • 23 September 2024

    Understanding the Rechargeability of CR2032 Button Cells

    What Are CR2032 Button Cells? Rechargeability of CR2032 Cells Panasonic - BSG CR2032 and Alternatives Practical Applications and Considerations CR2032 button cells power many small electronic devices. Understanding the rechargeability of these...
  • 24 September 2024

    CR2016 vs CR2032: Features and Benefits

    CR2016 vs CR2032: SpecificationsCR2016 vs CR2032: Performance CharacteristicsDifferences in Thickness and CapacityInterchangeability of CR2016 and CR2032Choosing the right battery for electronic devices ensures optimal performance. The comparison of...
  • 25 September 2024

    A Complete Guide to Selecting LR44 Battery Replacements

    Understanding LR44 BatteriesIdentifying Suitable ReplacementsPractical Steps for Selecting ReplacementsTips for Using Battery ReplacementsChoosing the right battery replacement ensures optimal performance for your devices. The LR44 battery serves as...
  • 26 September 2024

    CR2450 vs CR2032 Which Battery Fits Your Device Best

    Understanding CR2450 and CR2032 BatteriesCR2450 and CR2032 Application DifferencesDetailed Comparison of CR2450 vs CR2032Choosing the right battery for your device ensures optimal performance and longevity. Batteries power everything...
  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.