MDM-31PH003K
Share:

ITT Cannon, LLC MDM-31PH003K

Part Number:
MDM-31PH003K
Manufacturer:
ITT Cannon, LLC
Ventron No:
50765-MDM-31PH003K
Description:
MICRO-D RCPT 31POS PIN 18" WIRE
ECAD Model:
Datasheet:
MDM-31PH003K Microminiature Catalog
Payment:
Payment
Delivery:
Delivery

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
ITT Cannon, LLC MDM-31PH003K technical specifications, attributes, parameters and parts with similar specifications to ITT Cannon, LLC MDM-31PH003K.
  • Factory Lead Time
    12 Weeks
  • Contact Material

    Contact Material refers to the material used to make the electrical contacts in a component. It determines the electrical conductivity, durability, and resistance to corrosion and wear of the contacts. Common contact materials include copper, silver, gold, and alloys of these metals. The choice of contact material depends on the specific application and the required performance characteristics.

    COPPER ALLOY
  • Insulation Material
    LIQUID CRYSTAL POLYMER
  • Shell Material
    ALUMINUM ALLOY
  • Mounting Option 1
    HOLE .087-.098
  • Mounting Option 2
    JACKSCREW
  • Packaging
    Bulk
  • Series

    Series, in the context of electronic components, refers to the arrangement of components in a circuit. When components are connected in series, they form a single path for current to flow through. The total resistance of a series circuit is the sum of the individual resistances of each component. Series connections are often used to control the flow of current in a circuit, as the total resistance can be adjusted by changing the number or type of components in the series.

    MDM
  • JESD-609 Code
    e4
  • Part Status

    Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

    Active
  • Termination

    Termination refers to the electrical characteristics of a component or circuit at its input or output terminals. It describes how the component or circuit interacts with external signals or devices. Termination can involve matching impedance, providing voltage or current regulation, or filtering unwanted signals. Proper termination ensures efficient signal transfer, minimizes reflections, and prevents damage to components. It is crucial for maintaining signal integrity and optimizing circuit performance.

    Crimp
  • ECCN Code
    EAR99
  • Connector Type

    Connector Type refers to the physical interface used to connect an electronic component to other devices or systems. It specifies the shape, size, pin configuration, and mating mechanism of the connector. Common connector types include USB, HDMI, Ethernet, and power connectors. The choice of connector type depends on factors such as signal type, data rate, power requirements, and environmental conditions.

    D-Sub
  • Number of Positions

    Number of Positions, in the context of electronic components, refers to the number of distinct terminals or connection points available on the component. It indicates the number of individual electrical connections that can be made to the component. A higher number of positions typically allows for more complex functionality and versatility in circuit design.

    31
  • Color
    Multiple, Individual
  • Number of Rows
    2
  • Gender
    Male
  • HTS Code
    8536.69.40.30
  • Subcategory
    D Type Connectors
  • Filter Feature
    NO
  • Mixed Contacts
    NO
  • Option
    GENERAL PURPOSE
  • Total Number of Contacts
    31
  • Shell Finish
    CADMIUM/YELLOW CHROMATE
  • Contact Finish
    Gold
  • Reliability
    COMMERCIAL
  • Operating Temperature (Max)
    125°C
  • Body Breadth
    0.308 inch
  • Operating Temperature (Min)
    -55°C
  • Empty Shell
    NO
  • Rated Current (Signal)
    3A
  • Contact Style
    Pin
  • Contact Resistance

    Contact resistance is the electrical resistance between two electrical contacts. It is caused by the imperfect contact between the two surfaces, which results in a small amount of resistance to the flow of current. Contact resistance can be a significant factor in the performance of electrical circuits, especially in high-power applications. It can cause power loss, heating, and even damage to components.

    8mOhm
  • Insulation Resistance

    Insulation Resistance is a measure of the resistance of an insulating material to the flow of electric current. It is typically measured in megaohms (MΩ) or gigohms (GΩ). A high insulation resistance indicates that the material is a good insulator, while a low insulation resistance indicates that the material is a poor insulator. Insulation resistance is important for preventing electrical leakage and ensuring the safe operation of electrical equipment.

    5000000000Ohm
  • Mating Contact Pitch
    0.05 inch
  • Shell Size
    E
  • Max Current Rating
    3A
  • Dielectric Withstanding Voltage
    600VAC V
  • Cable Length
    457mm
  • Durability
    500 Cycles
  • Wire/Cable Gauge
    26 AWG
  • Contact Pattern
    STAGGERED
  • Insertion Force-Max
    2.224 N
  • Withdrawl Force-Min
    .139 N
  • Mating Contact Row Spacing
    0.1 inch
  • 1st Connector
    Receptacle, Male Pins
  • 2nd Connector
    Individual Wire Leads
  • Connector Type A
    D-Sub, Receptacle
  • Connector Type B
    Wire Leads
  • Contact Design
    PREASSEM CONN
  • Length

    Length, in the context of electronic components, refers to the physical dimension of a component along its longest axis. It is typically measured in millimeters (mm) or inches (in). Length is a crucial parameter for determining the physical size and space requirements of a component on a printed circuit board (PCB) or other assembly. It also affects the component's electrical characteristics, such as inductance and capacitance, which can be influenced by the length of conductors or traces within the component.

    1.50' 457.20mm
  • Radiation Hardening
    No
  • RoHS Status
    Non-RoHS Compliant
Description
The MDM-31PH003K is MICRO-D RCPT 31POS PIN 18" WIRE , it is part of MDM series. they are designed to work as D-Sub Cables.MDM-31PH003K with pin details manufactured by Cannon. The MDM-31PH003K is available in Package,it is part of the electronic component Chips.that includes MDM Series. they are designed to operate as D-Sub Cables.it is with Operating Temperature .MDM-31PH003K with original stock manufactured by Cannon. The MDM-31PH003K is available in Package.Generally IC chips offer Mounting Style features such as SMD/SMT, Package Case of MDM-31PH003Kis designed to work in , it's Operating Temperature is .The MDM-31PH003K is available in Package, is part of the D-Sub Cables and belong to Cable Assemblies.MDM-31PH003K with EDA / CAD Models manufactured by Cannon. The MDM-31PH003K is available in Package, is part of the Cable Assemblies.The MDM-31PH003K is D-Sub Cables with package manufactured by Cannon. The MDM-31PH003K is available in Package, is part of the MICRO-D RCPT 31POS PIN 18" WIRE.
MDM-31PH003K More Descriptions
Connector,D-Shell,Cable Mnt,RECEPT,31 Contacts,PIN,0.05 Pitch,SOLDER Terminal,HOLE .087-.098
Connector D-Subminiature 0.457m 26AWG Micro D-Subminiature 31 POS PIN Crimp
MICRO 31 M 18 RBW JACKS
MICRO 31POS PIN 18"
CAN MDM-31PH003K
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.