MCP4131-104E/P

Microchip Technology MCP4131-104E/P

Part Number:
MCP4131-104E/P
Manufacturer:
Microchip Technology
Ventron No:
3019576-MCP4131-104E/P
Description:
IC POT DGTL SNGL 100K SPI 8DIP
ECAD Model:
Datasheet:
MCP4131-104E/P

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Overview
Description
The MCP41XX and MCP42XX devices are a family of SPI digital potentiometers with volatile memory. They offer a wide range of product offerings, including:
Single or dual resistor network options
Potentiometer or rheostat configuration options
7-bit or 8-bit resistor network resolution
RAB resistances of 5kΩ, 10kΩ, 50kΩ, or 100kΩ
Zero scale to full-scale wiper operation
Low wiper resistance (75Ω typical)
Low tempco (50 ppm typical for rheostat, 15 ppm typical for potentiometer)
SPI serial interface (10 MHz, modes 0,0 & 1,1)
High-speed read/writes to wiper registers
SDI/SDO multiplexing (MCP41X1 only)
Resistor network terminal disconnect feature via shutdown pin (SHDN) or Terminal Control (TCON) Register
Brown-out reset protection (1.5V typical)
Serial interface inactive current (2.5 µA typical)
High-voltage tolerant digital inputs (up to 12.5V)
Internal weak pull-up on all digital inputs
Wide operating voltage (2.7V to 5.5V)
Device characteristics specified for 1.8V to 5.5V device operation
Wide bandwidth (-3 dB) operation (2 MHz typical for 5.0kΩ device)
Extended temperature range (-40°C to 125°C)

Features
Single or dual resistor network options
Potentiometer or rheostat configuration options
7-bit or 8-bit resistor network resolution
RAB resistances of 5kΩ, 10kΩ, 50kΩ, or 100kΩ
Zero scale to full-scale wiper operation
Low wiper resistance (75Ω typical)
Low tempco (50 ppm typical for rheostat, 15 ppm typical for potentiometer)
SPI serial interface (10 MHz, modes 0,0 & 1,1)
High-speed read/writes to wiper registers
SDI/SDO multiplexing (MCP41X1 only)
Resistor network terminal disconnect feature via shutdown pin (SHDN) or Terminal Control (TCON) Register
Brown-out reset protection (1.5V typical)
Serial interface inactive current (2.5 µA typical)
High-voltage tolerant digital inputs (up to 12.5V)
Internal weak pull-up on all digital inputs
Wide operating voltage (2.7V to 5.5V)
Device characteristics specified for 1.8V to 5.5V device operation
Wide bandwidth (-3 dB) operation (2 MHz typical for 5.0kΩ device)
Extended temperature range (-40°C to 125°C)

Applications
Audio level control
LED brightness control
Motor speed control
Sensor calibration
Voltage dividers
Current limiters
Programmable filters
Programmable attenuators
Programmable gain amplifiers
Specifications
Microchip Technology MCP4131-104E/P technical specifications, attributes, parameters and parts with similar specifications to Microchip Technology MCP4131-104E/P.
  • Factory Lead Time
    14 Weeks
  • Mount
    Through Hole
  • Mounting Type
    Through Hole
  • Package / Case
    8-DIP (0.300, 7.62mm)
  • Number of Pins
    8
  • Operating Temperature
    -40°C~125°C
  • Packaging
    Tube
  • Published
    2007
  • Tolerance
    ±20%
  • JESD-609 Code
    e3
  • Pbfree Code
    yes
  • Part Status
    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • ECCN Code
    EAR99
  • Temperature Coefficient
    150 ppm/°C
  • Resistance
    100kOhm
  • Number of Positions
    128
  • Terminal Finish
    Matte Tin (Sn)
  • Technology
    CMOS
  • Voltage - Supply
    1.8V~5.5V
  • Terminal Position
    DUAL
  • Number of Functions
    1
  • Supply Voltage
    5V
  • Terminal Pitch
    2.54mm
  • Base Part Number
    MCP4131
  • Pin Count
    8
  • Operating Supply Voltage
    5V
  • Configuration
    Potentiometer
  • Interface
    SPI
  • Number of Circuits
    1
  • Nominal Supply Current
    1mA
  • Memory Type
    Volatile
  • Bandwidth
    0.1 kHz
  • Taper
    Linear
  • Number of Taps
    129
  • Total Resistance
    100000Ohm
  • Resistance - Wiper (Ω) (Typ)
    75
  • Resistor Terminal Voltage-Max
    5V
  • Height
    4.953mm
  • Length
    10.16mm
  • Width
    7.112mm
  • Radiation Hardening
    No
  • REACH SVHC
    No SVHC
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.