Microchip Technology MCP3008T-I/SL

MCP3008T-I/SL Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 16-SOIC (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MCP3008 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Single number.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.Surface Mount is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 5.5V.4, 8 inputs are employed.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 5V.The number of channels is growing strong/weak: 8.The conversion rate of this electrical AD converter is calculated as 200 ksps.The ADC converter consists of 1 elements.The output voltage is maintain at 4.1V.

MCP3008T-I/SL Features
1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 2.7V
1 elements

MCP3008T-I/SL Applications
There are a lot of Microchip Technology MCP3008T-I/SL ADC applications.

Spectrum Analysis
High Speed Data Acquisition
RADAR processing, digital oscilloscopes
Communication test equipment
Multiplexed Data Acquisition Systems
Medical Instrumentation and medical imaging
Data Acquisition Systems
Music reproduction technology
Wireless local loop
Digital signal processing