MCP1755T-3302E/DC

• Factory Lead Time
  6 Weeks
• Mount
  Surface Mount
• Mounting Type
  Surface Mount
• Package / Case
  SOT-223-6
• Number of Pins
  5
• Operating Temperature
  -40°C~125°C
• Packaging
  Tape & Reel (TR)
• Published
  2012
• Tolerance
  2%
• JESD-609 Code
  e3
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  1 (Unlimited)
• Number of Terminations
  5
• Terminal Finish
  Matte Tin (Sn) - annealed
• Subcategory
  Other Regulators
• Packing Method
  TAPE AND REEL
• Technology
  CMOS
• Terminal Position
  DUAL
• Terminal Form
  GULL WING
• Peak Reflow Temperature (Cel)
  260
• Number of Functions
  1
• Reflow Temperature-Max (s)
  40
• Base Part Number
  MCP1755
• Current - Supply (Max)
  400μA
• Number of Outputs
  1
• Qualification Status
  Not Qualified
• Voltage - Input (Max)
  16V
• Output Voltage
  3.3V
• Output Type
  Fixed
• Max Output Current
  300mA
• Nominal Supply Current
  68μA
• Output Configuration
  Positive
• Quiescent Current
  100μA
• Control Features
  Enable, Power Good
• Accuracy
  2 %
• Output Voltage 1
  3.3V
• Min Input Voltage
  3.6V
• Protection Features
  Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)
• Voltage Dropout (Max)
  0.5V @ 300mA
• PSRR
  80dB (1kHz)
• Dropout Voltage
  300mV
• Dropout Voltage1-Nom
  0.3V
• Power Supply Rejection Ratio (PSRR)
  80dB
• Nominal Output Voltage
  3.3V
• REACH SVHC
  No SVHC
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

MCP1755T-3302E/DC Overview
The package is delivered in a Tape & Reel (TR) case. This battery regulator is contained in a SOT-223-6 package. In total, there are 5 terminations on the gadget. Regulator IC chip's output type is Fixed. The range of operating temperatures of Surface Mount are programmable in the Voltage Regulator Chip, so that the temperature can be varied as desired. The IC voltage regulator must be maintained at -40°C~125°C degrees for it to function. This regulator's output function is configured to be Positive. As a result of this IC voltage regulator's 1 outputs, it ensures prompt, adequate performance for all your applications. In terms of its dropout voltage, it is 10 volts. On the chip, there are pins for the 5 axis. Here's the basic part number for this IC regulator: MCP1755. In this instance, we are dealing with a typical Other Regulators-shaped component. Packing the voltage regulator IC in this way is called TAPE AND REEL packing. The maximal output current reaches 300mA to meet the operating requirements. It operates in the 100μA Quiescent Current state. Tolerance for this regulator IC is 2%, which is very low.

MCP1755T-3302E/DC Features
300mV dropout voltage
Other Regulators subtageroy
TAPE AND REEL method of packing
2% tolerance

MCP1755T-3302E/DC Applications
There are a lot of Microchip Technology MCP1755T-3302E/DC Linear Voltage Regulators applications.

Semi-automation
IO devices
ADAS (Advanced Driver-Assistance System)
Laboratory
Subsequent
Car infotainment
Engine management
Smart buildings
VCO (Voltage-Controlled Oscillator)
eBike