MCP1701AT-2502I/MB

• Factory Lead Time
  10 Weeks
• Mount
  Surface Mount
• Mounting Type
  Surface Mount
• Package / Case
  TO-243AA
• Number of Pins
  3
• Operating Temperature
  -40°C~85°C
• Packaging
  Tape & Reel (TR)
• Published
  2006
• JESD-609 Code
  e3
• Pbfree Code
  yes
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  1 (Unlimited)
• Number of Terminations
  3
• ECCN Code
  EAR99
• Terminal Finish
  Matte Tin (Sn)
• Subcategory
  Other Regulators
• Packing Method
  TAPE AND REEL
• Max Power Dissipation
  500mW
• Technology
  CMOS
• Terminal Position
  SINGLE
• Terminal Form
  FLAT
• Peak Reflow Temperature (Cel)
  260
• Number of Functions
  1
• Reflow Temperature-Max (s)
  40
• Base Part Number
  MCP1701A
• Pin Count
  3
• Number of Outputs
  1
• Voltage - Input (Max)
  10V
• Output Voltage
  2.5V
• Output Type
  Fixed
• Output Configuration
  Positive
• Power Dissipation
  500W
• Current - Output
  125mA
• Quiescent Current
  4.5μA
• Accuracy
  2 %
• Output Voltage 1
  2.5V
• Number of Regulators
  1
• Protection Features
  Short Circuit
• Voltage Dropout (Max)
  0.7V @ 120mA
• Dropout Voltage
  400mV
• Dropout Voltage1-Nom
  0.4V
• Voltage Tolerance-Max
  2%
• Input Bias Current
  2μA
• Length
  4.495mm
• Width
  2.445mm
• Radiation Hardening
  No
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

MCP1701AT-2502I/MB Overview
In a Tape & Reel (TR) case, the IC voltage regulator is delivered. In TO-243AA cases, it is packaged. On the Voltage regulator IC, there are 3 terminations that can be connected. Fixed is the Voltage Regulator Chip's output type. The electronic component implements 1 Voltage regulator ICs. Regulator IC varies the range of Surface Mount operating temperatures. The Voltage Regulated IC operates at a temperature of -40°C~85°C degrees, which is its operating temperature. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 125mA. The chip itself consists of 3 pins in total, which make up its overall size. There are 1 outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. There is a 10 volt dropout voltage on this transistor. A 3-pin is present on the chip. FYI, the basic part number for this IC regulator is MCP1701A. The component shown here is a typical Other Regulators component. Packing the voltage regulator IC in this way is called TAPE AND REEL packing. It operates in the 4.5μA Quiescent Current state.

MCP1701AT-2502I/MB Features
400mV dropout voltage
Other Regulators subtageroy
TAPE AND REEL method of packing

MCP1701AT-2502I/MB Applications
There are a lot of Microchip Technology MCP1701AT-2502I/MB Linear Voltage Regulators applications.

4WD transfercase
Pressure sensor
Raspberry Pi
Set top boxes
Automotive applications
Measurement and control euipment
Low-voltage microprocessor power supplies
Motorcycle
PLL (Phase-Locked Loop)
High output current applications