ON Semiconductor MC100EP33MNR4G

MC100EP33MNR4G Overview
This is a device supplied in the 8-VFDFN Exposed Pad package. It is configured using 8terminations. 3.3Vis enabled to operate in an extremely flexible manner due to its supply voltage. There are 1 terminations on the device. All component pins are equal to 8. Tape & Reel (TR)is the packaging method used for this package. As part of the circuit, there are 8pins that connect other components. Using [0], it can be mounted. Due to the fact that it is a member of the 100EPseries, it has a wide range of applications. A logic type of Divide-by-4 is adopted. Ideally, the operating temperature should be set to -40°C~85°C. There is a mounting type of Surface Mounton this device. Providing a voltage of 3V~5.5Vensures higher reliability of operation. Based on the Pbfree code, the result may be yes. This electronic device is equipped with the following features [0]. Further related parts can be found under its base part number 100EP33. From the voltage source, there is -4.5Vvoltage. In order to operate, it requires a voltage of [0]. There is a minimum supply voltage (Vsup) of 3V volts. The part is from Prescaler/Multivibrators family. This device is configured with 1 data/clock inputs.

MC100EP33MNR4G Features
Embedded in the 8-VFDFN Exposed Pad package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Operating supply voltage of 5.5V

MC100EP33MNR4G Applications
There are a lot of ON Semiconductor MC100EP33MNR4G Counters & Dividers applications.

Digital multiplexing and demultiplexing
Divide-by"N" counters/frequency synthesizers
Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
Time Out Timer for Consumer-Application Industrial Controls
Programmable decade counters
Programmable binary and decade
Clocks
Divide-by-N counting
Frequency dividers
DIVISION