Maxim Integrated MAX5360MEUK T

Description
The MAX5360/MAX5361/MAX5362 are low-cost, 6-bit digital-to-analog converters (DACs) in miniature 5-pin SOT23 packages with a simple 2-wire serial interface that allows communication with multiple devices. The MAX5360 has an internal 2V reference and operates from a 2.7V to 3.6V supply. The MAX5361 has an internal 4V reference and operates from a 4.5V to 5.5V supply. The MAX5362 operates over the full 2.7V to 5.5V supply range and has an internal reference equal to 0.9 x VDD.
The fast-mode 12C-compatible serial interface allows communication at data rates up to 400kbps, minimizing board space and reducing interconnect complexity in many applications. Each device is available with one of four factory-preset addresses (see Selector Guide).
The MAX5360/MAX5361/MAX5362 also include an output buffer, a low-power shutdown mode, and a power-on reset that ensures the DAC outputs are at zero when power is initially applied. In shutdown mode, the supply current is reduced to less than 1μA and the output is pulled down with a 10k resistor to GND.
The MAX5360/MAX5361/MAX5362 are available in miniature 5-pin SOT23 packages.

Features
6-Bit Accuracy in a Tiny 5-Pin SOT23 Package
Wide 2.7V to 5.5V Supply Range (MAX5362)
1μA Shutdown Mode
Buffered Output Drives Resistive Loads
Low Glitch Power-On-Reset to Zero DAC Output
Fast 12C-Compatible Serial Interface
≤5% Full-Scale Error (MAX5362)
≤1LSB (max) INL/DNL
Low 230μA max Supply Current

Applications
Automatic Tuning (VCO)
Power Amplifier Bias Control
Automatic Gain Control
Automatic Offset Adjustment
Programmable Threshold Levels