Maxim Integrated MAX1248ACPE

Description
The MAX1248/MAX1249 are 10-bit data acquisition systems that combine a 4-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. They operate from a single 2.7V to 5.25V supply, and their analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation.
The 4-wire serial interface connects directly to SPI™/QSPI™ and MICROWIRE™ devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1248/MAX1249 use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions.
The MAX1248 has an internal 2.5V reference, while the MAX1249 requires an external reference. Both parts have a reference-buffer amplifier with a ±1.5% voltage adjustment range.
These devices provide a hard-wired SHDN pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX1248/MAX1249, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under 60µA at reduced sampling rates.
The MAX1248/MAX1249 are available in a 16-pin DIP and a very small QSOP that occupies the same board area as an 8-pin SO.

Features
4-Channel Single-Ended or 2-Channel Differential Inputs
Single 2.7V to 5.25V Operation
Internal 2.5V Reference (MAX1248)
Low Power:
1.2mA (133ksps, 3V supply)
54μA (1ksps, 3V supply)
1μA (power-down mode)
SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface
Software-Configurable Unipolar or Bipolar Inputs
16-Pin QSOP Package (same area as 8-pin SO)

Applications
Battery-Powered Instruments
Portable Data Logging
Data Acquisition
Medical Instruments
Pen Digitizers
System Supervision