0 Shopping Cart

Vishay BC Components MAL215847123E3

Part Number:

MAL215847123E3

Manufacturer:

Vishay BC Components

Ventron No:

303743-MAL215847123E3

Description:

CAP ALUM 12000UF 20% 40V SNAP

ECAD Model:

Datasheet:

MAL215847123E3

Payment:

Payment

Delivery:

Delivery

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
  • One Stop Service

    One Stop Service

  • Competitive Price

    Competitive Price

  • Source Traceability

    Source Traceability

  • Same Day Delivery

    Same Day Delivery

Specifications

Vishay BC Components MAL215847123E3 technical specifications, attributes, parameters and parts with similar specifications to Vishay BC Components MAL215847123E3.

  • Factory Lead Time
    13 Weeks
  • Mount
    Through Hole
  • Mounting Type

    Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

    Through Hole
  • Package / Case

    Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.

    Radial, Can - Snap-In
  • Dielectric Material
    ALUMINUM (WET)
  • Operating Temperature

    Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.

    -40°C~105°C
  • Packaging
    Bulk
  • Series

    Series, in the context of electronic components, refers to the arrangement of components in a circuit. When components are connected in series, they form a single path for current to flow through. The total resistance of a series circuit is the sum of the individual resistances of each component. Series connections are often used to control the flow of current in a circuit, as the total resistance can be adjusted by changing the number or type of components in the series.

    158 PUL-SI
  • Published
    2015
  • Size / Dimension
    1.378Dia 35.00mm
  • Tolerance

    Tolerance in electronic components refers to the allowable deviation from the specified value. It indicates the range within which the actual value of the component can vary while still meeting the manufacturer's specifications. Tolerance is typically expressed as a percentage of the nominal value, such as ±5% or ±10%. A lower tolerance indicates a tighter range of acceptable values, resulting in more precise and consistent performance.

    ±20%
  • JESD-609 Code
    e3
  • Pbfree Code
    yes
  • Part Status

    Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

    Active
  • Moisture Sensitivity Level (MSL)

    Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

    Not Applicable
  • Number of Terminations
    2
  • Termination

    Termination refers to the electrical characteristics of a component or circuit at its input or output terminals. It describes how the component or circuit interacts with external signals or devices. Termination can involve matching impedance, providing voltage or current regulation, or filtering unwanted signals. Proper termination ensures efficient signal transfer, minimizes reflections, and prevents damage to components. It is crucial for maintaining signal integrity and optimizing circuit performance.

    Snap in
  • ECCN Code
    EAR99
  • Terminal Finish
    Matte Tin (Sn)
  • Applications
    General Purpose
  • Voltage - Rated

    Voltage - Rated refers to the maximum voltage that an electronic component can withstand without being damaged. It is typically specified in volts (V) and is an important parameter to consider when selecting components for a circuit. Exceeding the rated voltage can lead to component failure, so it is important to ensure that the voltage applied to a component does not exceed its rated voltage.

    40V
  • Capacitance

    Capacitance is the ability of a component to store electrical charge. It is measured in farads (F). A capacitor is a passive electronic component that consists of two conductors separated by an insulator. When a voltage is applied across the capacitor, charge builds up on the conductors. The amount of charge that can be stored depends on the capacitance of the capacitor. Capacitors are used in a variety of electronic circuits, including filters, timing circuits, and energy storage devices.

    12000μF
  • Terminal Pitch
    10mm
  • Lead Pitch
    10.0076mm
  • Capacitor Type
    ALUMINUM ELECTROLYTIC CAPACITOR
  • ESR (Equivalent Series Resistance)
    56mOhm @ 100Hz
  • Lead Spacing

    Lead spacing refers to the distance between the centers of two adjacent leads on an electronic component. It is typically measured in millimeters (mm) or inches (in). Lead spacing is an important parameter to consider when designing printed circuit boards (PCBs), as it determines the size and layout of the board. Proper lead spacing ensures that the component can be properly mounted and soldered onto the PCB, and that there is sufficient clearance between the leads to prevent short circuits.

    0.394 10.00mm
  • Rated (DC) Voltage (URdc)
    40V
  • Lifetime @ Temp
    5000 Hrs @ 105°C
  • Leakage Current

    Leakage current is the small amount of current that flows through an electronic component when it is not supposed to. It is typically measured in nanoamperes (nA) or picoamperes (pA). Leakage current can be caused by a number of factors, including the type of semiconductor material used, the manufacturing process, and the operating temperature. Leakage current can be a problem in electronic circuits because it can lead to increased power consumption and reduced battery life.

    0.96mA
  • Ripple Current

    Ripple current is the alternating current (AC) component of the current flowing through a capacitor. It is caused by the charging and discharging of the capacitor as the AC voltage applied to it changes. The ripple current can cause the capacitor to heat up and can also lead to premature failure. The maximum ripple current that a capacitor can handle is specified in its datasheet.

    4A
  • Polarization

    Polarization in electronic components refers to the orientation of the electric field within the component. It is a measure of the component's ability to store electrical energy. A polarized component has a positive and a negative terminal, and the electric field is oriented from the positive to the negative terminal. When a polarized component is connected to a voltage source, the electric field is established and the component stores electrical energy.

    Polar
  • Life (Hours)
    5000 hours
  • Impedance

    Impedance is a measure of the opposition to the flow of alternating current (AC) in an electrical circuit. It is a complex quantity that has both magnitude and phase. The magnitude of impedance is measured in ohms, and the phase is measured in degrees. Impedance is determined by the resistance, inductance, and capacitance of the circuit. Resistance is the opposition to the flow of current due to the material of the conductor. Inductance is the opposition to the flow of current due to the magnetic field created by the current. Capacitance is the opposition to the flow of current due to the storage of charge on the plates of a capacitor.

    45mOhm
  • Ripple Current @ Low Frequency
    4A @ 100Hz
  • Diameter
    35mm
  • Height

    Height, in the context of electronic components, refers to the vertical dimension of the component. It is typically measured in millimeters (mm) or inches (in). Height is an important parameter to consider when designing and assembling electronic circuits, as it affects the overall size and form factor of the device. Components with a smaller height are often preferred for applications where space is limited, such as in portable devices or embedded systems.

    35mm
  • Height Seated (Max)
    1.457 37.00mm
  • Radiation Hardening
    No
  • RoHS Status
    ROHS3 Compliant

Description

MAL215847123E3 Overview
For 56mOhm @ 100Hz to fully function, the equivalent series resistance has to be provided.It is 4A @ 100Hz at the lowest charge for ripple current.Seating height (Max) should be kept below 1.457 37.00mm.It is recommended that the device's rated voltage (URdc) be set to 40V (40V).It is recommended that the operating temperature be kept at -40°C~105°C to achieve high efficiency.

MAL215847123E3 Features
the ripple current is 4A @ 100Hz.
an operating temperature of -40°C~105°C


MAL215847123E3 Applications
There are a lot of Vishay BC Components
MAL215847123E3 applications of aluminum electrolytic capacitors.


Power supplies
Computer motherboards
Uninterruptible power supplies
Frequency converters
Computer
Telecommunication
Industrial systems
Smoothing and filtering applications
Standard and switched mode power supplies
Energy storage in pulse systems
MAL215847123E3 More Descriptions
CAP 12000UF 40V 35X35 105C 5000H SNAP IN
CAP ALUM 12000UF 20% 40V SNAP
12000 40V 35X35Mm 105 5000H |Vishay MAL215847123E3

Product Comparison

The three parts on the right have similar specifications to MAL215847123E3.
  • Image
    Part Number
    Manufacturer
    Factory Lead Time
    Mount
    Mounting Type
    Package / Case
    Dielectric Material
    Operating Temperature
    Packaging
    Series
    Published
    Size / Dimension
    Tolerance
    JESD-609 Code
    Pbfree Code
    Part Status
    Moisture Sensitivity Level (MSL)
    Number of Terminations
    Termination
    ECCN Code
    Terminal Finish
    Applications
    Voltage - Rated
    Capacitance
    Terminal Pitch
    Lead Pitch
    Capacitor Type
    ESR (Equivalent Series Resistance)
    Lead Spacing
    Rated (DC) Voltage (URdc)
    Lifetime @ Temp
    Leakage Current
    Ripple Current
    Polarization
    Life (Hours)
    Impedance
    Ripple Current @ Low Frequency
    Diameter
    Height
    Height Seated (Max)
    Radiation Hardening
    RoHS Status
    Terminal Shape
    Packing Method
    Tan Delta
    Custom Capabilities
    Voltage - Rated DC
    Lead Diameter
    Voltage
    View Compare
  • MAL215847123E3
    MAL215847123E3
    13 Weeks
    Through Hole
    Through Hole
    Radial, Can - Snap-In
    ALUMINUM (WET)
    -40°C~105°C
    Bulk
    158 PUL-SI
    2015
    1.378Dia 35.00mm
    ±20%
    e3
    yes
    Active
    Not Applicable
    2
    Snap in
    EAR99
    Matte Tin (Sn)
    General Purpose
    40V
    12000μF
    10mm
    10.0076mm
    ALUMINUM ELECTROLYTIC CAPACITOR
    56mOhm @ 100Hz
    0.394 10.00mm
    40V
    5000 Hrs @ 105°C
    0.96mA
    4A
    Polar
    5000 hours
    45mOhm
    4A @ 100Hz
    35mm
    35mm
    1.457 37.00mm
    No
    ROHS3 Compliant
    -
    -
    -
    -
    -
    -
    -
    -
  • MAL201351689E3
    10 Weeks
    Through Hole
    Through Hole
    Radial, Can
    ALUMINUM (WET)
    -40°C~85°C
    Tape & Box (TB)
    013 RLC
    2016
    0.323Dia 8.20mm
    ±20%
    e3
    yes
    Active
    Not Applicable
    2
    Radial
    EAR99
    Matte Tin (Sn)
    Audio
    50V
    68μF
    5mm
    5.0038mm
    ALUMINUM ELECTROLYTIC CAPACITOR
    -
    0.197 5.00mm
    50V
    3000 Hrs @ 85°C
    0.0078mA
    150mA
    Polar
    3000 hours
    1.2Ohm
    150mA @ 100Hz
    8.2mm
    11mm
    0.472 12.00mm
    No
    ROHS3 Compliant
    WIRE
    BULK
    0.08
    10 % Tolerance Available On Request
    -
    -
    -
  • MAL201351479E3
    10 Weeks
    Through Hole
    Through Hole
    Radial, Can
    ALUMINUM (WET)
    -40°C~85°C
    Tape & Box (TB)
    013 RLC
    2016
    0.323Dia 8.20mm
    ±20%
    e3
    yes
    Active
    Not Applicable
    2
    Radial
    EAR99
    Matte Tin (Sn)
    Audio
    50V
    47μF
    5mm
    5.0038mm
    ALUMINUM ELECTROLYTIC CAPACITOR
    -
    0.197 5.00mm
    50V
    3000 Hrs @ 85°C
    0.0057mA
    130mA
    Polar
    3000 hours
    1.3Ohm
    130mA @ 100Hz
    8.2mm
    11mm
    0.472 12.00mm
    No
    ROHS3 Compliant
    WIRE
    BULK
    0.08
    10 % Tolerance Available On Request
    -
    -
    -
  • MAL201336479E3
    8 Weeks
    Through Hole
    Through Hole
    Radial, Can
    ALUMINUM (WET)
    -40°C~85°C
    Tape & Box (TB)
    013 RLC
    2008
    0.323Dia 8.20mm
    ±20%
    e3
    yes
    Active
    Not Applicable
    2
    Radial
    EAR99
    Matte Tin (Sn)
    Audio
    -
    47μF
    -
    5mm
    ALUMINUM ELECTROLYTIC CAPACITOR
    -
    0.197 5.00mm
    -
    3000 Hrs @ 85°C
    2.4μA
    130mA
    Polar
    3000 hours
    5Ohm
    130mA @ 100Hz
    8.2mm
    11mm
    0.472 12.00mm
    No
    ROHS3 Compliant
    WIRE
    AMMO PACK
    0.08
    10 % Tolerance Available On Request
    25V
    600 μm
    25V

Certification

  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • 06 September 2023
    TDA8356 Specifications, Characteristics and Application Circuits
    Ⅰ. Overview of TDA8356TDA8356 is a new field scanning output integrated circuit produced by Philips of the Netherlands. It is widely used in various domestic and imported large-screen...
  • 06 September 2023
    All You Need to Know About MPS2222A
    Ⅰ. Overview of MPS2222AMPS2222A is an NPN transistor produced by Fairchild Semiconductor. Its main features include power dissipation of 0.625W; collector current of 0.6A; maximum withstand voltage of...
  • 06 September 2023
    A4988 Characteristics, Application and Basic Principle
    A4988 is an efficient and commonly used stepper motor driver chip, widely used in 3D printing and CNC machine tools and other fields. We will discuss in depth...
  • 07 September 2023
    What Is The Difference Between NE5532 And RC4558D?
    Ⅰ. Overview of NE5532NE5532 is a dual operational amplifier chip with excellent performance and low noise characteristics. Its circuit design is similar to that of a common operational...