LTC3736EGN-1#PBF

• Factory Lead Time
  8 Weeks
• Lifecycle Status
  PRODUCTION (Last Updated: 2 weeks ago)
• Mounting Type
  Surface Mount
• Package / Case
  24-SSOP (0.154, 3.90mm Width)
• Surface Mount
  YES
• Number of Pins
  24
• Operating Temperature
  -40°C~85°C TA
• Packaging
  Tube
• Published
  2004
• JESD-609 Code
  e3
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  1 (Unlimited)
• Number of Terminations
  24
• ECCN Code
  EAR99
• Terminal Finish
  Matte Tin (Sn)
• Subcategory
  Switching Regulator or Controllers
• Technology
  CMOS
• Terminal Position
  DUAL
• Terminal Form
  GULL WING
• Peak Reflow Temperature (Cel)
  260
• Terminal Pitch
  0.635mm
• Reflow Temperature-Max (s)
  30
• Base Part Number
  LTC3736
• Function
  Step-Down
• Number of Outputs
  2
• Output Voltage
  9.8V
• Output Type
  Transistor Driver
• Input Voltage-Nom
  4.2V
• Number of Channels
  1
• Analog IC - Other Type
  DUAL SWITCHING CONTROLLER
• Output Configuration
  Positive
• Output Current
  5A
• Voltage - Supply (Vcc/Vdd)
  2.75V~9.8V
• Control Features
  Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
• Topology
  Buck
• Control Mode
  CURRENT-MODE
• Frequency - Switching
  300kHz~750kHz
• Control Technique
  PULSE WIDTH MODULATION
• Synchronous Rectifier
  Yes
• Switcher Configuration
  PUSH-PULL
• Max Frequency
  825kHz
• Max Duty Cycle
  100 %
• Clock Sync
  No
• Height
  1.48mm
• Length
  8.74mm
• Width
  3.99mm
• REACH SVHC
  No SVHC
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

LTC3736EGN-1#PBF Overview
Capsuled in the 24-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. For outputs of 2, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tube. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 2.75V~9.8V. Suitable for work in a -40°C~85°C TA dc switcher. There is a switch at 300kHz~750kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Various 24 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 4.2V. LTC3736 can be searched for other relevant dc to dc converter ics. In total, switching converter has 24 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 9.8V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 5A. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. There is a maximum frequency of 825kHz on this dc regulators. The number of channels available for high-quality communication is 1.

LTC3736EGN-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 300kHz~750kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %

LTC3736EGN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3736EGN-1#PBF DC to DC converter applications.

Electrical power transmission
Servo drive system
Photovoltaic power
Planers
PSRR circuits
Telecommunications equipment
Hydrogen power
seismic instrument power circuits
CNC system
Hydro power