LTC3716EG#PBF

• Factory Lead Time
  8 Weeks
• Lifecycle Status
  PRODUCTION (Last Updated: 2 weeks ago)
• Mounting Type
  Surface Mount
• Package / Case
  36-SSOP (0.209, 5.30mm Width)
• Surface Mount
  YES
• Number of Pins
  36
• Operating Temperature
  -40°C~85°C TA
• Packaging
  Tube
• Published
  2001
• JESD-609 Code
  e3
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  1 (Unlimited)
• Number of Terminations
  36
• ECCN Code
  EAR99
• Terminal Finish
  Matte Tin (Sn)
• Subcategory
  Switching Regulator or Controllers
• Technology
  CMOS
• Terminal Position
  DUAL
• Terminal Form
  GULL WING
• Peak Reflow Temperature (Cel)
  260
• Terminal Pitch
  0.65mm
• Frequency
  300kHz
• Reflow Temperature-Max (s)
  30
• Base Part Number
  LTC3716
• Function
  Step-Down
• Number of Outputs
  2
• Output Voltage
  36V
• Output Type
  Transistor Driver
• Input Voltage-Nom
  15V
• Number of Channels
  1
• Analog IC - Other Type
  SWITCHING CONTROLLER
• Output Configuration
  Positive
• Output Current
  20A
• Voltage - Supply (Vcc/Vdd)
  4V~36V
• Control Features
  Enable, Power Good, Soft Start
• Input Voltage (Min)
  3.6V
• Topology
  Buck
• Control Mode
  CURRENT-MODE
• Frequency - Switching
  140kHz~310kHz
• Input Voltage (Max)
  30V
• Control Technique
  PHASE-SHIFT CONTROL
• Synchronous Rectifier
  Yes
• Switcher Configuration
  PHASE-SHIFT
• Input Current
  1.2mA
• Duty Cycle (Max)
  99.5%
• Clock Sync
  No
• Height
  -50μm
• Length
  13.1mm
• Width
  5.6mm
• REACH SVHC
  No SVHC
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

LTC3716EG#PBF Overview
It comes in a 36-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 2. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4V~36V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 140kHz~310kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. An array of 36 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PHASE-SHIFT CONTROL. DC switcher's input voltageis 15V volts. In addition to "LTC3716", there are other relevant dc to dc converter ics you can find. In total, switching converter has 36 pins. Switching converter is a type of Switching Regulator or Controllers in particular. This dc dc voltage regulator should be powered by a voltage of 3.6V. Test statistics indicate DC regulator outputs 36V voltage. The dc to dc regulator is limited to 30V input voltage. The dc dc regulator's usual output current is 20A, which should be noted down when you start a project. Switching controller operates at a frequency of 300kHz. There are 1 channels for high-quality communication. If the current flow input is 1.2mA, the switching converter could operate.

LTC3716EG#PBF Features
Transistor Driver Outputs
Switching Frequency: 140kHz~310kHz
Enable, Power Good, Soft Start
PHASE-SHIFT CONTROL
Frequency: 300kHz

LTC3716EG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3716EG#PBF DC to DC converter applications.

Wind power
Experimental setup
Geothermal power
Cutting machine tools
Arc suppression circuits
Electric water heaters
Computer-related products
Program control systems
Scientific testing
Adjustable voltage or current linear circuits