Linear Technology LTC2301HMS#TRPBF

Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.

Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

Supply Voltage is the voltage required to power an electronic component. It is typically measured in volts (V) and is specified in the component's datasheet. The supply voltage must be within the specified range for the component to function properly. If the supply voltage is too low, the component may not function at all. If the supply voltage is too high, the component may be damaged.

Input Type refers to the type of signal that an electronic component can accept as input.

Converter Type refers to the type of conversion performed by an electronic component, such as an analog-to-digital converter (ADC) or a digital-to-analog converter (DAC). It specifies the input and output signal types that the converter can handle.

Reference type is a parameter that specifies the type of reference used in an electronic component. It can be either a voltage reference or a current reference. A voltage reference provides a stable voltage output, while a current reference provides a stable current output. The type of reference used depends on the application. For example, a voltage reference is used in a voltage regulator to provide a stable voltage output, while a current reference is used in a current source to provide a stable current output.

Ratio - S/H:ADC is an electronic component parameter that specifies the ratio of the output voltage of a sample-and-hold (S/H) circuit to the input voltage of the analog-to-digital converter (ADC). It is expressed as a percentage and indicates the accuracy of the ADC's conversion process. A higher ratio indicates better accuracy, as it means that the ADC is able to convert the analog input signal into a digital representation with less error.

Length, in the context of electronic components, refers to the physical dimension of a component along its longest axis. It is typically measured in millimeters (mm) or inches (in). Length is a crucial parameter for determining the physical size and space requirements of a component on a printed circuit board (PCB) or other assembly. It also affects the component's electrical characteristics, such as inductance and capacitance, which can be influenced by the length of conductors or traces within the component.