LTC1197LCMS8#PBF

Linear Technology LTC1197LCMS8#PBF

Part Number:
LTC1197LCMS8#PBF
Manufacturer:
Linear Technology
Ventron No:
3010233-LTC1197LCMS8#PBF
Description:
IC ADC 10BIT 250KHZ W/SD 8-MSOP
ECAD Model:
Datasheet:
LTC1197LCMS8#PBF

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Linear Technology LTC1197LCMS8#PBF technical specifications, attributes, parameters and parts with similar specifications to Linear Technology LTC1197LCMS8#PBF.
  • Lifecycle Status
    PRODUCTION (Last Updated: 2 weeks ago)
  • Factory Lead Time
    14 Weeks
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Number of Pins
    8
  • Operating Temperature
    0°C~70°C
  • Packaging
    Tube
  • Published
    2001
  • JESD-609 Code
    e3
  • Part Status
    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • Termination
    SMD/SMT
  • ECCN Code
    EAR99
  • Terminal Finish
    Matte Tin (Sn)
  • Subcategory
    Analog to Digital Converters
  • Max Power Dissipation
    25mW
  • Technology
    CMOS
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Supply Voltage
    2.7V
  • Terminal Pitch
    0.65mm
  • Time@Peak Reflow Temperature-Max (s)
    30
  • Base Part Number
    LTC1197
  • Pin Count
    8
  • Qualification Status
    Not Qualified
  • Polarity
    Unipolar
  • Power Supplies
    2.7V
  • Configuration
    S/H-ADC
  • Number of Channels
    1
  • Interface
    SPI, Serial
  • Max Supply Voltage
    9V
  • Min Supply Voltage
    4V
  • Nominal Supply Current
    800μA
  • Power Dissipation
    2.2mW
  • Number of Bits
    10
  • Input Type
    Differential, Single Ended
  • Architecture
    SAR
  • Converter Type
    ADC, SUCCESSIVE APPROXIMATION
  • Supply Type
    Single
  • Reference Type
    External
  • Data Interface
    SPI
  • Resolution
    1.25 B
  • Sampling Rate
    250 ksps
  • Voltage - Supply, Analog
    2.7V~4V
  • Voltage - Supply, Digital
    2.7V~4V
  • Number of Analog In Channels
    1
  • Sampling Rate (Per Second)
    250k
  • Output Bit Code
    BINARY
  • Linearity Error-Max (EL)
    0.0977%
  • Integral Nonlinearity (INL)
    1 LSB
  • Sample and Hold / Track and Hold
    SAMPLE
  • Ratio - S/H:ADC
    1:1
  • Analog Input Voltage-Max
    2.75V
  • Analog Input Voltage-Min
    -0.05V
  • Conversion Time-Max
    2.9μs
  • Height
    860μm
  • Length
    3mm
  • Width
    3mm
  • REACH SVHC
    No SVHC
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Description
LTC1197LCMS8#PBF Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 2.7V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 250k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~4V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC1197 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.It is possible to categorize the supply type according to Single.The supply/digital voltage of this electrical AD converter is 2.7V~4V.Surface Mount is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 9V.It operates with the minimal supply voltage of 4V.The maximal analog input voltage of this electrical AD converter is 2.75V.The ADC converter operates from 2.7V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 2.2mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 25mW.The number of channels is growing strong/weak: 1.The minimal analog input voltage of this electrical AD converter is -0.05V.

LTC1197LCMS8#PBF Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 4V
2.7V power supplies


LTC1197LCMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC1197LCMS8#PBF ADC applications.


Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
Scientific instruments.
Music reproduction technology
Communication Systems
LTC1197LCMS8#PBF More Descriptions
Single Channel Single ADC SAR 250ksps 10-bit Serial 8-Pin MSOP
ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, PDSO8
10-Bit, 500ksps ADCs in MSOP with Auto Shutdown
Analog to Digital Converters - ADC 250ksps Diff input 3V 10-Bit ADC
IC, SM, ADC, 10-BIT; Resolution (Bits):10bit; Sampling Rate:500kSPS; Data Interface:Serial, 3-Wire; Supply Voltage Range - Analogue:2.7V to 4V; Supply Current:800µA; IC Case Style:SOP; No. of Pins:8; Operating Temperature Range:0°C to 70°C; SVHC:No SVHC (20-Jun-2011); Base Number:1197; Conversion Time:1.4µs; Digital IC Case Style:MSOP; Input Channel Type:Differential; Input Type:Differential; Interface Type:3-Wire, Serial; Linearity Error ADC / DAC :1LSB; Linearity Error ADC / DAC -:1LSB; No. of Bits:10; No. of Channels:1; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Package / Case:MSOP; Sample Rate:500kSPS; Sample Rate:250kSPS; Supply Voltage Max:9V; Supply Voltage Min:4V; Termination Type:SMD; Voltage Regulator Type:ADC
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.