Linear Technology LTC1196-2ACS8#PBF

Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.

Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

Architecture refers to the internal design and organization of an electronic component. It encompasses the arrangement of functional blocks, their interconnections, and the overall data flow within the component. The architecture determines the component's performance characteristics, such as speed, power consumption, and functionality. It also influences the component's size, cost, and reliability.

The number of inputs of an electronic component refers to the number of separate signals or data streams that the component can receive and process simultaneously. It indicates the maximum number of external connections that can be made to the component to provide input signals. This parameter is crucial for determining the functionality and connectivity of the component within a circuit or system.

Data Interface refers to the physical and logical means by which an electronic component communicates with other components or systems. It defines the protocols, pinouts, and signal characteristics used for data exchange. The Data Interface parameter specifies the type of interface supported by the component, such as SPI, I2C, UART, or Ethernet. It ensures compatibility and proper communication between different devices within a system.

Ratio - S/H:ADC is an electronic component parameter that specifies the ratio of the output voltage of a sample-and-hold (S/H) circuit to the input voltage of the analog-to-digital converter (ADC). It is expressed as a percentage and indicates the accuracy of the ADC's conversion process. A higher ratio indicates better accuracy, as it means that the ADC is able to convert the analog input signal into a digital representation with less error.

Length, in the context of electronic components, refers to the physical dimension of a component along its longest axis. It is typically measured in millimeters (mm) or inches (in). Length is a crucial parameter for determining the physical size and space requirements of a component on a printed circuit board (PCB) or other assembly. It also affects the component's electrical characteristics, such as inductance and capacitance, which can be influenced by the length of conductors or traces within the component.