LP2988AIMM-5.7

Part Number:: LP2988AIMM-5.7

Manufacturer:

Ventron No:: 4555723-LP2988AIMM-5.7

Description:: IC REG LDO 5.7V 0.2A 8VSSOP

ECAD Model:

Datasheet:: LP2987, LP2988

Specifications

LP2988AIMM-5.7 technical specifications, attributes, parameters and parts with similar specifications to LP2988AIMM-5.7.

Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins
8
Operating Temperature
-40°C~125°C
Packaging
Tape & Reel (TR)
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Position
DUAL
Terminal Form
GULL WING
Number of Functions
1
Terminal Pitch
0.65mm
Base Part Number
LP2988
Pin Count
8
Current - Supply (Max)
3.7mA
Voltage - Input (Max)
16V
Output Voltage
5.7V
Output Type
Fixed
Output Configuration
Positive
Current - Output
200mA
Control Features
Enable
Output Voltage 1
5.7V
Input Voltage (Min)
6.7V
Number of Regulators
1
Protection Features
Over Current, Over Temperature, Short Circuit
Current - Quiescent (Iq)
120μA
Voltage Dropout (Max)
0.35V @ 200mA
PSRR
65dB (1kHz)
Dropout Voltage
180mV
Min Current Limit
250mA
Length
3mm
Width
3mm
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead

Description

LP2988AIMM-5.7 Overview
In a Tape & Reel (TR) case, the IC voltage regulator is delivered. A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case contains the Liner IC. In total, there are 8 terminations on the gadget. This PMIC chip has an output type of Fixed. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 200mA. There are 8 pins in total on this board. There is a 10 volt dropout voltage on this transistor. A 8-pin is present on the chip. It is LP2988 for this voltage regulator IC, just for your information.

LP2988AIMM-5.7 Features
180mV dropout voltage

LP2988AIMM-5.7 Applications
There are a lot of Texas Instruments
LP2988AIMM-5.7 Linear Voltage Regulators applications.

Portable telephone
Electronic notebook
Camera
Video equipment
CPU power supply
Switching regulator
Multiple-power supply system
Digital audio player
Digital TV
Smartcard

LP2988AIMM-5.7 More Descriptions

IC REG LDO 5.7V 0.2A 8VSSOP
5.7 V FIXED POSITIVE LDO REGULATOR 0.35 V DROPOUT PDSO8
IC REG LINEAR POS ADJ 3A TO220-5
IC REG LINEAR 5.7V 200MA 8VSSOP
200MA LOW NOISE LDO ERROR FLAG
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor. The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise. Using an optimized VIP(TM) (Vertically Integrated PNP) process, these regulators deliver superior performance: Dropout Voltage: 180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical). Ground Pin Current: 1 mA @ 200 mA load, and 200 uA @ 10 mA load (typical). Sleep Mode: The LP2987/8 draws less than 2 uA quiescent current when shutdown pin is held low. Error Flag/Reset: The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin. Precision Output: Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with guaranteed accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.

Certification