Texas Instruments LM2917M-8
- Part Number:
- LM2917M-8
- Manufacturer:
- Texas Instruments
- Ventron No:
- 3282352-LM2917M-8
- Description:
- IC CONVERTER FREQ TO VOLT 8-SOIC
- Datasheet:
- LM2917M-8
Texas Instruments LM2917M-8 technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments LM2917M-8.
- Lifecycle StatusNRND (Last Updated: 5 days ago)
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / Case8-SOIC (0.154, 3.90mm Width)
- Number of Pins8
- PackagingTube
- JESD-609 Codee0
- Part StatusNot For New Designs
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations8
- ECCN CodeEAR99
- Terminal FinishTin/Lead (Sn/Pb)
- Max Operating Temperature85°C
- Min Operating Temperature-40°C
- SubcategoryAnalog Special Function Converters
- TechnologyBIPOLAR
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)235
- Number of Functions1
- Supply Voltage12V
- Terminal Pitch1.27mm
- Base Part NumberLM2917
- Pin Count8
- Temperature GradeINDUSTRIAL
- Max Supply Voltage28V
- Min Supply Voltage12V
- Supply Current-Max6mA
- Frequency (Max)10kHz
- Linearity±0.3%
- Positive Input Voltage-Max10.5V
- Height1.75mm
- Length4.9mm
- Width3.91mm
- Thickness1.58mm
- Radiation HardeningNo
- RoHS StatusNon-RoHS Compliant
- Lead FreeContains Lead
LM2917M-8 Overview
The package 8-SOIC (0.154, 3.90mm Width) contains it. A component of this electronic system has been mounted in the direction of Surface Mount. Tube is the way it is packaged. In this case, an electrical device of type Frequency to Voltage is being used. A 8 termination involves terminating a transmission line with a device that matches its characteristic impedance. There is a pin count of 8 on the device. The device is powered by a supply voltage of 12V. According to the base part number, its related parts can be founded. When a computer or other device is connected to the Internet, there are 8 pins, which are pronged contacts. For the purpose of ensuring the reliability of the device, it operates at a minimum operating temperature of -40°C. To ensure reliability, the device operates at a maximum operating temperature of 85°C. It is mounted in the direction of Surface Mount. Analog Special Function Converters contains this part. There should be a higher supply voltage (Vsup) than 12V. 28V is the maximum supply voltage (Vsup). It operates at a maximum frequency of 10kHz. Based on the maximum supply current 6mA, it operates.
LM2917M-8 Features
8-SOIC (0.154, 3.90mm Width) package
8 terminations
8 pin count
8 pins
The maximal supply current of 6mA
LM2917M-8 Applications
There are a lot of Texas Instruments LM2917M-8 V/F & F/V Converters applications.
Low-Cost Analog-to-Digital Conversion
Motor speed control
Fm analog signal mod/d emod
Isol ated data transmission
Cruise Control
FM Demodulation
Frequency to Voltage Conversions
Frequency Meters/Tachometer
13-bit Analog-to-Digital Converters (ADC)
Over-and Under-Speed Sensing
The package 8-SOIC (0.154, 3.90mm Width) contains it. A component of this electronic system has been mounted in the direction of Surface Mount. Tube is the way it is packaged. In this case, an electrical device of type Frequency to Voltage is being used. A 8 termination involves terminating a transmission line with a device that matches its characteristic impedance. There is a pin count of 8 on the device. The device is powered by a supply voltage of 12V. According to the base part number, its related parts can be founded. When a computer or other device is connected to the Internet, there are 8 pins, which are pronged contacts. For the purpose of ensuring the reliability of the device, it operates at a minimum operating temperature of -40°C. To ensure reliability, the device operates at a maximum operating temperature of 85°C. It is mounted in the direction of Surface Mount. Analog Special Function Converters contains this part. There should be a higher supply voltage (Vsup) than 12V. 28V is the maximum supply voltage (Vsup). It operates at a maximum frequency of 10kHz. Based on the maximum supply current 6mA, it operates.
LM2917M-8 Features
8-SOIC (0.154, 3.90mm Width) package
8 terminations
8 pin count
8 pins
The maximal supply current of 6mA
LM2917M-8 Applications
There are a lot of Texas Instruments LM2917M-8 V/F & F/V Converters applications.
Low-Cost Analog-to-Digital Conversion
Motor speed control
Fm analog signal mod/d emod
Isol ated data transmission
Cruise Control
FM Demodulation
Frequency to Voltage Conversions
Frequency Meters/Tachometer
13-bit Analog-to-Digital Converters (ADC)
Over-and Under-Speed Sensing
LM2917M-8 More Descriptions
LM2907/LM2917 Frequency to Voltage Converter | IC CONVERTER FREQ TO VOLT 8-SOIC
Non-RoHS Compliant Tin/Lead (Sn/Pb) Surface Mount e0 F/V converter 12V 4.9mm 10kHz 85C
Frequency-to-voltage converter for ground or supply referred load up to 50-mA (with Zener regulat 8-SOIC -40 to 85
French Electronic Distributor since 1988
The LM2907, LM2917 series are monolithic frequency to voltage converters with a high gain op amp/comparator designed to operate a relay, lamp, or other load when the input frequency reaches or exceeds a selected rate. The tachometer uses a charge pump technique and offers frequency doubling for low ripple, full input protection in two versions (LM2907-8, LM2917-8) and its output swings to ground for a zero frequency input. The op amp/comparator is fully compatible with the tachometer and has a floating transistor as its output. This feature allows either a ground or supply referred load of up to 50 mA. The collector may be taken above VCC up to a maximum VCE of 28V. The two basic configurations offered include an 8-pin device with a ground referenced tachometer input and an internal connection between the tachometer output and the op amp non-inverting input. This version is well suited for single speed or frequency switching or fully buffered frequency to voltage conversion applications. The more versatile configurations provide differential tachometer input and uncommitted op amp inputs. With this version the tachometer input may be floated and the op amp becomes suitable for active filter conditioning of the tachometer output. Both of these configurations are available with an active shunt regulator connected across the power leads. The regulator clamps the supply such that stable frequency to voltage and frequency to current operations are possible with any supply voltage and a suitable resistor.
Non-RoHS Compliant Tin/Lead (Sn/Pb) Surface Mount e0 F/V converter 12V 4.9mm 10kHz 85C
Frequency-to-voltage converter for ground or supply referred load up to 50-mA (with Zener regulat 8-SOIC -40 to 85
French Electronic Distributor since 1988
The LM2907, LM2917 series are monolithic frequency to voltage converters with a high gain op amp/comparator designed to operate a relay, lamp, or other load when the input frequency reaches or exceeds a selected rate. The tachometer uses a charge pump technique and offers frequency doubling for low ripple, full input protection in two versions (LM2907-8, LM2917-8) and its output swings to ground for a zero frequency input. The op amp/comparator is fully compatible with the tachometer and has a floating transistor as its output. This feature allows either a ground or supply referred load of up to 50 mA. The collector may be taken above VCC up to a maximum VCE of 28V. The two basic configurations offered include an 8-pin device with a ground referenced tachometer input and an internal connection between the tachometer output and the op amp non-inverting input. This version is well suited for single speed or frequency switching or fully buffered frequency to voltage conversion applications. The more versatile configurations provide differential tachometer input and uncommitted op amp inputs. With this version the tachometer input may be floated and the op amp becomes suitable for active filter conditioning of the tachometer output. Both of these configurations are available with an active shunt regulator connected across the power leads. The regulator clamps the supply such that stable frequency to voltage and frequency to current operations are possible with any supply voltage and a suitable resistor.
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
08 October 2023
2N3773 Transistor Equivalent, Features and Applications
Ⅰ. 2N3773 transistor overviewⅡ. Symbol and pin connection of 2N3773Ⅲ. Technical parametersⅣ. What are the features of 2N3773?Ⅴ. How does the 2N3773 achieve amplification and switching functions in... -
08 October 2023
IRFP260N Power Mosfet Transistor: Symbol, Features and Working Principle
Ⅰ. IRFP260N transistor descriptionⅡ. Symbol, footprint and pin connection of IRFP260NⅢ. Technical parametersⅣ. Features of IRFP260NⅤ. How does IRFP260N work and how does it drive IRFP260N?Ⅵ. Absolute maximum... -
09 October 2023
TIP117 Darlington Power Transistor Pinout, Equivalent, Features and Uses
Ⅰ. Overview of TIP117Ⅱ. The symbol, footprint and pinout of TIP117Ⅲ. Technical parameters of TIP117Ⅳ. What are the features of TIP117?Ⅴ. Package and packaging of TIP117Ⅵ. What are... -
09 October 2023
Lithium CR2450 Battery Symbol, Equivalent, Specifications and Uses
Ⅰ. What is CR2450 battery?Ⅱ. CR2450 symbol and footprintⅢ. Specifications of CR2450 batteryⅣ. What are the features of CR2450 battery?Ⅴ. What are the uses of CR2450 battery?Ⅵ. What...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.