Texas Instruments LM27951SD/NOPB

Description
The LM27951 is a switched capacitor white-LED driver capable of driving up to 4 LEDs with 30mA through each LED. Its 4 tightly regulated current sources ensure excellent LED current and brightness matching. LED drive current is programmed by an external sense resistor. The LM27951 operates over an input voltage range from 2.8V to 5.5V and requires only four low-cost ceramic capacitors.
The LM27951 provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of 3/2, or in a gain of 1. Maximum efficiency is achieved over the input voltage range by actively selecting the proper gain based on the LED forward voltage requirements.
The LM27951 uses constant frequency pre-regulation to minimize conducted noise on the input. It has a fixed 750kHz switching frequency optimized for portable applications. The LM27951 consumes less than 1μA of supply current when shut down.
The LM27951 is available in a 14-pin No-Pullback WSON package.

Features
Drives up to 4 LEDs with up to 30mA each
Regulated current sources with 0.2% (typ.) matching
3/2x, 1x Gain transition based on LED VF
Peak Efficiency Over 85%
Input Voltage Range: 2.8V to 5.5V
PWM Brightness Control
Very Small Solution Size - NO INDUCTOR
Fixed 750kHz Switching Frequency
<1μA Shutdown Current
14-pin WSON Package: 4.0mm X 3.0mm X 0.8mm

Applications
White LED Display Backlights
White LED Keypad Backlights
General Purpose LED Lighting