STMicroelectronics LD1117S18TR

LD1117S18TR Overview
In a Tape & Reel (TR) case, the IC voltage regulator is delivered. A TO-261-4, TO-261AA case contains the Liner IC. Basically, the voltage regulator chip is made up of 4 terminations. Fixed is the Voltage Regulator Chip's output type. The electronic component implements 1 Voltage regulator ICs. The range of operating temperatures of Surface Mount are programmable in the Voltage Regulator Chip, so that the temperature can be varied as desired. In order for this IC voltage regulator to operate, the temperature has to be kept at 0°C~125°C degrees. There is an output function of Positive configured for this regulator. There is a current output of 800mA from this regulator IC. There are a total of 4 pins on this board. This IC regulator has a total of 1 outputs, which ensures a rapid, adequate performance when in use. A dropout voltage of 10 volts can be obtained from this voltage regulator IC. The component's pin number remains 3. FYI, the basic part number for this IC regulator is LD1117. There is a way of packing the regulator that is called TR, 7 INCH. A maximum output current of 1.3A is required to meet the operation requirements. It operates in the 10mA Quiescent Current state.

LD1117S18TR Features
1.1V dropout voltage
TR, 7 INCH method of packing

LD1117S18TR Applications
There are a lot of STMicroelectronics LD1117S18TR Linear Voltage Regulators applications.

Car infotainment
Desktop microcomputer systems
LCD backlight
Car window lift
Transmission
Portable medical devices
Automated test equipment
TVS diodes
Switching regulator
Engine management