Intersil ISL91110IRNZ-T

Name: ISL91110IRNZ-T
Brand: Intersil
SKU: 3296298-ISL91110IRNZ-T
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: ISL91110IRNZ-T

Manufacturer:: Intersil

Ventron No:: 3296298-ISL91110IRNZ-T

Description:: IC REG BUCK BOOST 3.3V 20QFN

ECAD Model:

Datasheet:: ISL91110IRNZ-T

Specifications

Intersil ISL91110IRNZ-T technical specifications, attributes, parameters and parts with similar specifications to Intersil ISL91110IRNZ-T.

Factory Lead Time
17 Weeks
Mounting Type
Surface Mount
Package / Case
20-VFQFN Exposed Pad
Surface Mount
YES
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e3
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
20
ECCN Code
EAR99
Terminal Finish
MATTE TIN
Terminal Position
QUAD
Terminal Pitch
0.5mm
JESD-30 Code
S-PQCC-N20
Function
Step-Up/Step-Down
Number of Outputs
1
Voltage - Input (Max)
5.5V
Output Voltage
3.3V
Output Type
Fixed
Voltage - Input (Min)
1.8V
Input Voltage-Nom
3.6V
Analog IC - Other Type
SWITCHING REGULATOR
Output Configuration
Positive
Current - Output
2A
Voltage - Output (Min/Fixed)
3.3V
Topology
Buck-Boost
Frequency - Switching
2.5MHz
Control Technique
PULSE WIDTH MODULATION
Synchronous Rectifier
No
Length
4mm
Width
4mm
RoHS Status
ROHS3 Compliant

Description

ISL91110IRNZ-T Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. During the development of this harley voltage regulator, 20 terminations were made. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a 20-VFQFN Exposed Pad package to save space. The voltage regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Fixed output on its output pins. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. DC-DC switching regulators reach 2.5MHz switching frequencies. Despite its low input voltage, this voltage regulator can operate. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 3.3V. Featuring a 2A output current, dc to dc voltage regulator offers maximum design flexibility. There is a voltage regulator maximum input voltage of 5.5V. For operation, voltage regulator provides a nominal input voltage of 3.6V. At 3.3V volts, voltage regulator can provide voltage.

ISL91110IRNZ-T Features
1 outputs

ISL91110IRNZ-T Applications
There are a lot of Renesas Electronics America Inc.
ISL91110IRNZ-T Voltage Regulators applications.

Linear guide
Ball screw pair
Computer application technology
Network technology
Automation technology
CMM
Various precision measuring instruments
Various precision measuring detectors
Flaw detection equipment
Balance equipment

ISL91110IRNZ-T More Descriptions

Conv DC-DC Single Step Down 1.8V to 5.5V 20-Pin TQFN EP T/R
High Efficiency Buck-Boost Regulator With 4.5A Switches, 3.3/Tape & Reel Rohs Compliant: Yes |Renesas ISL91110IRNZ-T
IC REG BUCK-BOOST 3.3V 2A 20QFN
$ Accepts input voltages above or below regulated output voltage $ Automatic and seamless transitions between buck and boost modes $ Input voltage range: 1.8V to 5.5V $ Output current: up to 2A (PVIN = 3.4V, VOUT = 5V) (ISL91110IR only) $ Output current: up to 2A (PVIN = 2.5V, VOUT = 3.3V) (ISL91110 and ISL91110IR) $ Burst current: up to 3A (PVIN = 3V, VOUT = 3.3V, tON < 600μs, t = 4.6ms) $ High efficiency: up to 96% $ High efficiency: up to 95% (ISL91110IR only) $ 35μA quiescent current maximizes light- load efficiency $ 2.5MHz switching frequency minimizes external component size $ Fully protected for short-circuit, over-temperature, and undervoltage $ Small 2.33mmx2.07mm WLCSP (ISL91110 only) $ Small 4mmx4mm 20 Ld TQFN package (ISL91110IR only)

Certification