Microchip Technology HCS410/P

HCS410/P Overview
In package 8-DIP (0.300, 7.62mm), you will find the ICs.Contains this module is the package Tube.Mounting is done using the Through Hole method.There are a variety of integrated circuits for this type of Code Hopping Encoder and Transponder.It is possible to find similar integrated circuit systems by searching for the HCS410 family.In this case, it would be appropriate to apply the ICs in Access Control Systems.There are 8 terminations on the ICs solutions.In the ICs applications, there are 8 pins.3V is the correct setting for this logic gate IC.Through Hole would be a good mounting option for this ICs application.The integrated circuit chip's temperature should not be higher than 70°C when you use it.integrated circuit systems should not operate below 0°C.On the board, there are a total of 8 pins.It is integrated circuit system of the series KEELOQ?.This integrated circuit can operate at 6.6V supply voltage.There should be no voltage lower than 2V for this integrated circuit.A maximum supply current of 1.4mA is set.At 2.2mA supply current, this IC integrated circuit can be operated.

HCS410/P Features
Applications : Access Control Systems
It belongs to KEELOQ? Series
Operating Supply Current at 2.2mA

HCS410/P Applications
There are a lot of Microchip Technology HCS410/P Specialized ICs applications.

Reference Design License Management
IoT Node Authentication
Ecosystem Control
Portable Instruments
Membrane Keypads
Lossless generation of zero crossing signal
Anti-cloning
Peripheral Authentication
Message Security
Industrial Instruments