Fairchild/ON Semiconductor FPF34892UCX
- Part Number:
- FPF34892UCX
- Manufacturer:
- Fairchild/ON Semiconductor
- Ventron No:
- 4548113-FPF34892UCX
- Description:
- IC LOAD SWITCH SIDO 28WLCSP
- Datasheet:
- FPF34892UCX
Fairchild/ON Semiconductor FPF34892UCX technical specifications, attributes, parameters and parts with similar specifications to Fairchild/ON Semiconductor FPF34892UCX.
- Factory Lead Time2 Weeks
- Lifecycle StatusLAST SHIPMENTS (Last Updated: 1 week ago)
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / Case28-UFBGA, WLCSP
- Number of Pins28
- Weight62.5g
- Operating Temperature-40°C~85°C TA
- PackagingTape & Reel (TR)
- JESD-609 Codee1
- FeatureStatus Flag
- Pbfree Codeyes
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Resistance33mOhm
- Terminal FinishTin/Silver/Copper (Sn/Ag/Cu)
- Peak Reflow Temperature (Cel)NOT SPECIFIED
- Reflow Temperature-Max (s)NOT SPECIFIED
- Number of Outputs2
- Output TypeN-Channel
- InterfaceOn/Off
- Output ConfigurationHigh Side
- Voltage - Supply (Vcc/Vdd)Not Required
- Input TypeNon-Inverting
- Switch TypeGeneral Purpose
- Min Input Voltage2.7V
- Max Input Voltage13.5V
- Nominal Input Voltage13.5V
- Ratio - Input:Output1:2
- Voltage - Load2.7V~13.5V
- Fault ProtectionOver Temperature, Over Voltage, Reverse Current, UVLO
- Rds On (Typ)28m Ω, 33m Ω
- REACH SVHCNo SVHC
- RoHS StatusRoHS Compliant
FPF34892UCX Overview
The mount for this particular product is a surface mount, making it easy to install and secure onto a surface. It weighs 62.5g, making it lightweight and easy to handle. The packaging for this product is a tape and reel, providing convenience and protection during transportation and storage. One of its notable features is the status flag, which allows for easy monitoring and identification of its operational status. This product does not require a specific voltage supply, making it versatile and compatible with various power sources. Its input type is non-inverting, ensuring accurate and efficient data transmission. The nominal input voltage for this product is 13.5V, while the voltage load ranges from 2.7V to 13.5V. Additionally, this product is RoHS compliant, meeting the standards for environmental safety.
FPF34892UCX Features
Resistance of 33mOhm
FPF34892UCX Applications
There are a lot of ON Semiconductor FPF34892UCX Power Switches ICs applications.
Gaming
Solid State Drivers
PC Card Hot Swap
Set-Top Boxes
Wireless Headsets
Solid-State Drives
Storage (HDDs, SSDs)
Hot Swap
Storage Drives
Various applications equipped with buttons
The mount for this particular product is a surface mount, making it easy to install and secure onto a surface. It weighs 62.5g, making it lightweight and easy to handle. The packaging for this product is a tape and reel, providing convenience and protection during transportation and storage. One of its notable features is the status flag, which allows for easy monitoring and identification of its operational status. This product does not require a specific voltage supply, making it versatile and compatible with various power sources. Its input type is non-inverting, ensuring accurate and efficient data transmission. The nominal input voltage for this product is 13.5V, while the voltage load ranges from 2.7V to 13.5V. Additionally, this product is RoHS compliant, meeting the standards for environmental safety.
FPF34892UCX Features
Resistance of 33mOhm
FPF34892UCX Applications
There are a lot of ON Semiconductor FPF34892UCX Power Switches ICs applications.
Gaming
Solid State Drivers
PC Card Hot Swap
Set-Top Boxes
Wireless Headsets
Solid-State Drives
Storage (HDDs, SSDs)
Hot Swap
Storage Drives
Various applications equipped with buttons
FPF34892UCX More Descriptions
FAIRCHILD SEMICONDUCTOR FPF34892UCX POWER LOAD SWITCH, SIDO, 13.5V, WLCSP-28New
RoHS Compliant Non-Inverting Obsolete N-Channel General Purpose Power Switch/Driver -40C~85C TA 28m Ohm 33m Ohm 13.5V 62.5g
The FPF3489x features a Single Input Dual Output (SIDO) power switch, which offers surge protection and Over-Voltage Protection (OVP), to protect downstream components and enhancing overall system robustness. Channel one (VBUS to VOUT) is an active-low, 28 V/3.5 A rated, power MOSFET switch with an internal clamp supporting ±100 V surge protection, fixed OVP at 5.8V when OVSEL is tied to GND or 13.9V (FPF34891) / 10.4V (FPF34892) when OVSEL is floating.Channel two (VBUS to BAT) is an active-high, 5 V/6 A rated, power MOSFET, fixed OVP at VBUS is 5.8 V (±200 mV) and Reverse Current Blocking (RCB) during its OFF State. OVLO at BAT can be programmed by external resistors. The Over-Voltage status will be latched and FLAG will signal the fault by pulling low. To re-start this channel from OVLO, EN2 need to be toggled from LOW to HIGH.The FPF3489x is available in a 28-bump, 1.67 mm x 2.96 mm Wafer-Level Chip-Scale Package (WL-CSP) with 0.4 mm pitch.
RoHS Compliant Non-Inverting Obsolete N-Channel General Purpose Power Switch/Driver -40C~85C TA 28m Ohm 33m Ohm 13.5V 62.5g
The FPF3489x features a Single Input Dual Output (SIDO) power switch, which offers surge protection and Over-Voltage Protection (OVP), to protect downstream components and enhancing overall system robustness. Channel one (VBUS to VOUT) is an active-low, 28 V/3.5 A rated, power MOSFET switch with an internal clamp supporting ±100 V surge protection, fixed OVP at 5.8V when OVSEL is tied to GND or 13.9V (FPF34891) / 10.4V (FPF34892) when OVSEL is floating.Channel two (VBUS to BAT) is an active-high, 5 V/6 A rated, power MOSFET, fixed OVP at VBUS is 5.8 V (±200 mV) and Reverse Current Blocking (RCB) during its OFF State. OVLO at BAT can be programmed by external resistors. The Over-Voltage status will be latched and FLAG will signal the fault by pulling low. To re-start this channel from OVLO, EN2 need to be toggled from LOW to HIGH.The FPF3489x is available in a 28-bump, 1.67 mm x 2.96 mm Wafer-Level Chip-Scale Package (WL-CSP) with 0.4 mm pitch.
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
07 September 2023
What Is The Difference Between NE5532 And RC4558D?
Ⅰ. Overview of NE5532NE5532 is a dual operational amplifier chip with excellent performance and low noise characteristics. Its circuit design is similar to that of a common operational... -
07 September 2023
TPC8129 Internal Circuit, Specifications, Application and Marking
Ⅰ. Overview of TPC8129TPC8129 is a product of Toshiba, a Japanese comprehensive electronic and electrical company. It is a chip for LED driver circuits and is mainly used... -
12 September 2023
The Difference Between L293D and L298N
In this article we will explore the main differences between the L293D and L298N motor drivers. Both motor drives have their own unique features and applications. Understanding the... -
12 September 2023
Comprehensive Analysis of CR123A battery: Features, Applications and Purchase
Ⅰ. CR123A overviewThe CR123A battery, classified under the non-rechargeable (primary) category, is a high-performance power source with distinct specifications. Featuring a robust lithium manganese composition, it boasts a...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.