Texas Instruments DS40MB200SQ

DS40MB200SQ Overview
Transport is made easy with power buffer packaging in 48-WFQFN Exposed Pad.Package number Tape & Reel (TR) is ready for power buffer.It comes with a universal mout that allows for easy adaptation.Here's a typical Buffer, Multiplexer.It uses 3.135V~3.465V voltage for its operation, so it does not require batteries.As a result, 2 x 1:2, 2:1 channels collaborate to maintain output quality.There is CML input facilitation.To make sure that the cooling system does not malfunction, you should set the operating temperature to -40°C~85°C.You can also try searching with "DS40MB200" when you need specific pin-to-pin solutions for your special needs.On the op amp buffer, you can find 48 terminals.As a result, 260 is the maximum temperature at which it can be reflowed.When powered by 3.3V voltage, this splitter is capable of carrying out a number of demanding tasks.The pinout of the power buffer starts from 48 pins it has.The op amp buffers have 48 pins.In addition to the Surface Mount axis, it has a female hole for mounting to PCBs or other boards.A voltage of 70mA is required to operate this power buffer.Repeters cannot be fed voltages higher than 3.465V.In order to start up the splitter, it will need at least 3.13V.The spliter supports a total of 1 outputs.Both repeter and 1:2 FANOUT BUFFER AVAILABLE specialize in certain areas.

DS40MB200SQ Features
2 x 1:2, 2:1 channels.
1 outputs.
1:2 FANOUT BUFFER AVAILABLE.

DS40MB200SQ Applications
There are a lot of Texas Instruments DS40MB200SQ Signal Buffers, Repeaters, Splitters applications.

Digital Crossconnects
Cellular Phone Base Stations
Industrial Server
Cable Repeaters
Storage Area Networks
Portable IPC/HMI
Network Switches/Routers
Clock Distribution
Multidrop Buses
Loopback