Maxim Integrated DS1236A-5N

DS1236A-5N Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. Tube-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 2 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 16-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Through Hole mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. A total of 16 pins are located on this power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 4.5V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Through Hole mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain, Push-Pull of output voltage. For this power management, there is an 4mA volt supply current. Additionally, IC management are a variety of features, for example [0], to name a few. To find similar IC managements from the manufacturer, you can always search by DS1236A. The voltage supervisor requires a power source of 5V volts in order to work correctly. As you can see, this IC power comes from the well-known MicroManager series of products.

DS1236A-5N Features
Battery Backup Circuit type
Minimum supply voltage of 4.5V
4mA operating supply current


DS1236A-5N Applications
There are a lot of Maxim Integrated
DS1236A-5N Voltage Supervisors applications.


Transformer load monitoring equipment
External alarm
Display equipment
DC stabilized power supply module
Insulation fault location system
Magnetic resonance imaging
Stable power system
Sensitive sensors
Efficient information transmission
Functional modules