Texas Instruments DDC112UK

DDC112UK Overview
The analogue to digital converter is designed with 20 Bits.The AD converter is embedded in the 28-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 3k Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that DSI-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The number of pixels of this electrical AD converter is 2.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to DDC112 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Analog, Digital can be used to categorize supply types.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.The ADC converter operates from 5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 130mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 130mW.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 3 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. Simultaneous Sampling can be ensured when operating.The ADC converter consists of 1 elements.The digital converter operates with the minimal supply voltage (DC) of 4.75V.The ADC converter operates with the maximal supply voltage (DC) of 5.25V.

DDC112UK Features
1 Functions
28 basic kinds of terminations
28 pin count
Minimal supply voltage of 4.75V
5V power supplies
1 elements
Maximal supply voltage (DC) of 5.25V

DDC112UK Applications
There are a lot of Texas Instruments DDC112UK ADC applications.

High Speed Data Acquisition for PCs
Imaging Systems
Digital Multimeters, PLC's (Programming Logic Controllers)
Communication Systems
CMOS Image sensors for mobile applications
Instrumentation and test equipment
Music recording
Multiplexed Data Acquisition Systems
Medical Imaging
Wireless and wired broadband communications