Cypress Semiconductor Corp CY2309CSXI-1T

CY2309CSXI-1T Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. The 16-SOIC (0.154, 3.90mm Width) package includes this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 16 terminations found in the file. Basically, this time clock generator needs a voltage of 3.3V. The input of this clock generator is designed to be LVCMOS, LVTTL. To access the electronic component's full performance, 1 circuits are implemented. There is a maximum frequency of 133.33MHz Max with this clock-based frequency generator. Because of the Surface Mount, clock PLL can be easily mounted on the panel. It would be possible to supply this clock PLL with 3.6V of power. It is safe to use this frequency synthesizer with a supply voltage above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. The temperature should be set at -40°C~85°C to ensure reliable performance. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. According to the base part number, its related parts can be founded. It is possible to connect to the frequency generators via 16 pins. The supply voltage should be maintained at 3.3V for high efficiency. The device is usually classified as a type of Clock Drivers device. 9 signal outputs maximi9e the output frequency. As a result of this digital clock generator, there is a low timing skew at 0.2 ns max.

CY2309CSXI-1T Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY2309CSXI-1T Applications
There are a lot of Cypress Semiconductor Corp CY2309CSXI-1T Clock Generators applications.

Microwave backhaul IF
VSAT (Small Ground Satellite Station)
Local oscillators (LOs)
Reference signals to RF systems
Carrier synchronization in wired communication
Pagers
FMCW Radar
Closed circuit systems
Time to digital converters
Frequency shifting decodes