Rohm Semiconductor BD4954FVE-TR

BD4954FVE-TR Overview
As you can see, this power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes SOT-665 functions. It is a IC power that shares many benefits with other products from the Voltage Detector line. When 5.2V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. This power management has 5 pins. Supply voltage (Vsup) should be at least -300mV for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using BD49, the base power ics number. A power supply of 4.9V watts is required for the operation of this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.98μA. A PMIC from the well-known BD49xxx series of products is being offered here.

BD4954FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV


BD4954FVE-TR Applications
There are a lot of ROHM Semiconductor
BD4954FVE-TR Voltage Supervisors applications.


emergency room
Medical-specific isolation transformer
Medical-specific insulation monitor
Transformer load monitoring equipment
External alarm
Display equipment
DC stabilized power supply module
Insulation fault location system
Magnetic resonance imaging
Stable power system