Honeywell Sensing and Productivity Solutions AWM5103VN

Dry Gas 15 V dc Sensor/Switch without Indicator, 50psi Press, 0 - 15 sLpm | Honeywell AWM5103VN
Flow Sensor Measuring range: 0...15 SLPM Operating temperature: -20...70 °C Operating voltage: 8...15 VDC
SENSOR, MASS AIR FLOW, 15L/MIN; Pressure, Max:50psi; Voltage, Supply DC Max:15V; Max Flow Rate:15l/min; Range, Measuring:0 to 15 litres/min; External Depth:35mm; External Length / Height:163mm; Fixing Centres LxW:43.2 x 20.3; Hysteresis:± 0.5% of reading; Series:AWM5000; Supply Voltage:10V dc; Temp, Op. Max:85°C; Temp, Op. Min:-25°C; Time, Response:60ms; Voltage, Output:5V; Width, External:32mm
In-Line Flow MeasurementAWM5000 Series Microbridge Mass Airflow Sensors feature a Venturi type flow housing. They measure flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure drop of 2.25" H2
AWM5000 Series airflow sensor, amplified, flow/pressure range: 0 SLPM to 15.0 SLPM; threaded port style, ¼ NPT In-Line Flow Measurement AWM5000 Series Microbridge Mass Airflow Sensors feature a Venturi type flow housing. They measure flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure drop of 2.25" H2O. The microbridge chip is in direct contact with the flow stream, greatly reducing error possibilities due to orifice or bypass channel clogging. Rugged, Versatile Package The rugged plastic package has been designed to withstand common mode pressures up to 50 psi, and the small sensing element allows 100 g of shock without compromising performance. The included "AMP" compatible connector provides reliable connection in demanding applications. On-board Signal Conditioning Each AWM5000 sensor contains circuitry which performs amplification, linearization, temperature compensation, and gas calibration. A 1 to 5 Vdc linear output is possible for all listings regardless of flow range (5, 10, 15, or 20 SLPM) or calibration gas (nitrogen, carbon dioxide, nitrous oxide, or argon). All calibration is performed by active laser CAUTION PRODUCT DAMAGE AWM Series Microbridge Mass Airflow Sensors are not designed to sense liquid flow and will be damaged by liquid flow through the sensor. Failure to comply with these instructions could result in product damage.