Abracon LLC ASTMHTV-80.000MHZ-ZK-E

Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

Series, in the context of electronic components, refers to the arrangement of components in a circuit. When components are connected in series, they form a single path for current to flow through. The total resistance of a series circuit is the sum of the individual resistances of each component. Series connections are often used to control the flow of current in a circuit, as the total resistance can be adjusted by changing the number or type of components in the series.

Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

Frequency Stability measures the ability of an electronic component, such as an oscillator or crystal, to maintain a constant frequency over time and under varying conditions. It is expressed in parts per million (ppm) or percent over a specified time interval. Higher frequency stability indicates a more precise and reliable component. Factors affecting frequency stability include temperature, voltage, aging, and mechanical stress. Components with high frequency stability are crucial in applications requiring precise timing, such as communication systems, navigation devices, and scientific instruments.

Operating Frequency refers to the range of frequencies at which an electronic component can function effectively. It specifies the frequency range within which the component maintains its desired performance characteristics, such as gain, bandwidth, and impedance. Operating outside this frequency range may result in reduced performance, instability, or even damage to the component. The operating frequency is a crucial parameter for selecting components in electronic circuits, ensuring they operate within their intended frequency range for optimal performance and reliability.

Height, in the context of electronic components, refers to the vertical dimension of the component. It is typically measured in millimeters (mm) or inches (in). Height is an important parameter to consider when designing and assembling electronic circuits, as it affects the overall size and form factor of the device. Components with a smaller height are often preferred for applications where space is limited, such as in portable devices or embedded systems.