AP7361-15D-13

• Factory Lead Time
  18 Weeks
• Contact Plating
  Tin
• Mount
  Surface Mount
• Mounting Type
  Surface Mount
• Package / Case
  TO-252-3, DPak (2 Leads Tab), SC-63
• Weight
  3.949996g
• Operating Temperature
  -40°C~85°C
• Packaging
  Tape & Reel (TR)
• Published
  2011
• JESD-609 Code
  e3
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  1 (Unlimited)
• Number of Terminations
  2
• ECCN Code
  EAR99
• Subcategory
  Other Regulators
• Packing Method
  TAPE AND REEL
• Max Power Dissipation
  1.25W
• Technology
  CMOS
• Terminal Position
  SINGLE
• Terminal Form
  GULL WING
• Peak Reflow Temperature (Cel)
  260
• Number of Functions
  1
• Terminal Pitch
  2.286mm
• Reflow Temperature-Max (s)
  30
• Base Part Number
  AP7361
• JESD-30 Code
  R-PSSO-G2
• Number of Outputs
  1
• Voltage - Input (Max)
  6V
• Output Voltage
  1.5V
• Output Type
  Fixed
• Max Output Current
  1A
• Output Configuration
  Positive
• Power Dissipation
  1.25kW
• Quiescent Current
  90μA
• Accuracy
  1 %
• Output Voltage 1
  1.5V
• Number of Regulators
  1
• Min Input Voltage
  2.2V
• Protection Features
  Over Current, Over Temperature, Short Circuit
• Voltage Dropout (Max)
  0.7V @ 1A
• PSRR
  65dB ~ 45dB (1kHz ~ 10kHz)
• Reference Voltage
  800mV
• Dropout Voltage1-Nom
  0.5V
• Voltage Tolerance-Max
  3%
• Min Current Limit
  1.1A
• Input Voltage Absolute-Max
  6.5V
• Height Seated (Max)
  2.52mm
• Length
  6.58mm
• Radiation Hardening
  No
• REACH SVHC
  No SVHC
• RoHS Status
  ROHS3 Compliant

AP7361-15D-13 Overview
In the case of Tape & Reel (TR) cases, the regulater IC is delivered. Packaging of the Liner regulator IC takes the form of a TO-252-3, DPak (2 Leads Tab), SC-63 case. The PMIC chip has 2 terminations. Output type Fixed. This component features 1 Voltage regulators. IC Regulator is possible to alter the range of the operating temperature of Surface Mount in the device. In order for this IC voltage regulator to operate, the temperature has to be kept at -40°C~85°C degrees. There is an output function of Positive configured for this regulator. In order to ensure prompt, adequate, and prompt performance, this regulator has 1 outputs in total. It is AP7361 for this voltage regulator IC, just for your information. In this case, we have a typical Other Regulators component. TAPE AND REEL is the way in which the voltage regulator IC is packed. A maximum output current of 1A is required to meet the operation requirements. It operates in the 90μA Quiescent Current state.

AP7361-15D-13 Features
Other Regulators subtageroy
TAPE AND REEL method of packing

AP7361-15D-13 Applications
There are a lot of Diodes Incorporated AP7361-15D-13 Linear Voltage Regulators applications.

Camera
Electronic notebook
ADAS (Advanced Driver-Assistance System)
Power generator plants
4WD transfercase
Portable medical devices
Alternators
Blower
Measurement and control euipment
Body control modules