Texas Instruments ADS1282IPWR

ADS1282IPWR Overview
The analogue to digital converter is designed with 31 Bits.The AD converter is embedded in the 28-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 2.5V.The A/D converter has 2 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 4k Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 3.875 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS1282 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Depending on the supply type, analogue to digital converters can be categorized by Analog, Digital, Dual, Single.The supply/digital voltage of this electrical AD converter is 1.65V~3.6V.It is possible to mount the analogue to digital converter using Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 25mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 35mW.The conversion rate of this electrical AD converter is calculated as 4 ksps.PGA can be ensured when operating.The ADC converter consists of 1 elements.There are 2 analog transmissions, which are both based on how they adapt data to combine an input signal with a carrier signal. The maximal supply current amounts to 6.5mA.The dual supply type of this electronic AD converter is 2.5V.It operates with the minimal dual supply voltage of 2.15V.

ADS1282IPWR Features
1 Functions
28 basic kinds of terminations
28 pin count
Minimal supply voltage of 4.75V
1 elements

ADS1282IPWR Applications
There are a lot of Texas Instruments ADS1282IPWR ADC applications.

Communications
Data Acquisition Systems
Broadband data applications
Music recording
Rotary encoder
Scientific instruments.
Digital signal processing
High Speed Data Acquisition
GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
3-phase power control