Texas Instruments ADS1256IDBR

ADS1256IDBR Overview
The analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the 28-SSOP (0.209, 5.30mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 30k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 3 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Other Converters.It belongs to ADS1256 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply type of this electronic ADC converter is Analog, Digital.The supply/digital voltage of this electrical AD converter is 1.8V~3.6V.The ADC converter operates with the maximal supply voltage of 5.25V.4, 8 inputs are employed.It operates with the minimal supply voltage of 4.75V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 38mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 57mW.The conversion rate of this electrical AD converter is calculated as 30 ksps.PGA can be ensured when operating.The ADC converter consists of 1 elements.The digital converter operates with the minimal supply voltage (DC) of 1.8V.The ADC converter operates with the maximal supply voltage (DC) of 3.6V.

ADS1256IDBR Features
1 Functions
28 basic kinds of terminations
28 pin count
Minimal supply voltage of 4.75V
1 elements
Maximal supply voltage (DC) of 3.6V

ADS1256IDBR Applications
There are a lot of Texas Instruments ADS1256IDBR ADC applications.

Wireless local loop
Rotary encoder
Scientific instruments.
Multicarrier, multimode digital receivers
Medical Imaging
Broadband data applications
Digital Multimeters, PLC's (Programming Logic Controllers)
Digital beam-forming systems for ultrasound
GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
Industrial Process Control