Texas Instruments ADS1218Y/250G4

ADS1218Y/250G4 Overview
The analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the TQFP package.The ADC converter is packaged in the way of Tape and Reel.The ADC converter is equipped with 1 Functions .There are 48 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 8 channels.The is equipped with 48 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The number of pixels of this electrical AD converter is 3 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Other Converters.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Analog, Digital number.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 2.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 2.8mW.The conversion rate of this electrical AD converter is calculated as 1 ksps.It operates with the maximal operating temperature of 85°C to ensure its reliability.It operates with the minimal operating temperature of -40°C to ensure its reliability.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. There are 3 converters, which will convert numbers to words and figures to words. The digital converter operates with the minimal supply voltage (DC) of 2.7V.The ADC converter operates with the maximal supply voltage (DC) of 5.25V.There are 8 analog transmissions, which are both based on how they adapt data to combine an input signal with a carrier signal.

ADS1218Y/250G4 Features
1 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 2.7V
Maximal supply voltage (DC) of 5.25V


ADS1218Y/250G4 Applications
There are a lot of Texas Instruments
ADS1218Y/250G4 ADC applications.


CMOS Image sensors for mobile applications
Medical Instrumentation and medical imaging
Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope