Analog Devices Inc. ADM811RART-REEL7

ADM811RART-REEL7 Overview
It is mounted through 4 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 240. During operation, the power ic is supplied with a voltage of 3V. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 4 pins on the board. 4 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM811, which is the base power ics number. There is a requirement for 3V power to power this power management. The maximum supply temperature that PMIC chip can work with is 10μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.

ADM811RART-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current


ADM811RART-REEL7 Applications
There are a lot of Analog Devices Inc.
ADM811RART-REEL7 Voltage Supervisors applications.


Power distribution systems of CCU
emergency room
Medical-specific isolation transformer
Medical-specific insulation monitor
Transformer load monitoring equipment
External alarm
Display equipment
DC stabilized power supply module
Insulation fault location system
Magnetic resonance imaging