NS ADC08832IN

Part Number:: ADC08832IN

Manufacturer:: NS

Ventron No:: 6012437-ADC08832IN

Description:

ECAD Model:

Datasheet:: ADC08832IN

Specifications

NS ADC08832IN technical specifications, attributes, parameters and parts with similar specifications to NS ADC08832IN.

Package / Case
8-DIP
Surface Mount
NO
Number of Pins
8
Number of Terminations
8
ECCN Code
EAR99
Technology
CMOS
Terminal Position
DUAL
Terminal Form
THROUGH-HOLE
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
2.54mm
Pin Count
8
Operating Temperature (Min)
-40°C
Temperature Grade
INDUSTRIAL
Number of Circuits
1
Number of Bits
8
Converter Type
ADC, SUCCESSIVE APPROXIMATION
Resolution
1 B
Sampling Rate
153 ksps
Number of Analog In Channels
2
Output Bit Code
BINARY
Sample and Hold / Track and Hold
SAMPLE
Analog Input Voltage-Max
5.05V
Output Format
SERIAL
Analog Input Voltage-Min
-0.05V
Conversion Time-Max
4μs
Width
7.62mm
RoHS Status
RoHS Compliant
Lead Free
Contains Lead

Description

ADC08832IN Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 8-DIP package.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The is equipped with 8 pin count.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The maximal analog input voltage of this electrical AD converter is 5.05V.The minimal analog input voltage of this electrical AD converter is -0.05V.The minimal operating temperature should exceed -40°C.1 circuits are used to achieve its superior flexibility.

ADC08832IN Features
1 Functions
8 basic kinds of terminations
8 pin count

ADC08832IN Applications
There are a lot of Texas Instruments
ADC08832IN ADC applications.

Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
Scientific instruments.
Music reproduction technology
Communication Systems
Data Acquisition Systems
Handheld Terminal Interface

ADC08832IN More Descriptions

THROUGH-HOLE DUAL CMOS SERIAL analog digital converter -40C 5.05V 4mus 153ksps
2-CH 8-BIT SUCCESSIVE APPROXIMATION ADC SERIAL ACCESS PDIP8
The ADC08831/ADC08832 are 8-bit successive approxima-tion Analog to Digital converters with 3-wire serial interfaces and a configurable input multiplexer for 2 channels. The se-rial I/O will interface to COPS (TM)family of micro-controllers, Pl D's, microprocessors, DSP's, or shift registers. The serialI/O is configured to comply with the NSC MICRO WIRE (TM) serial data exchange standard. To minimize total power consumption, theADC08831/ADC08832 automatically go into low power mode whenever they are not performing conversions. A track/hold function allows the analog voltage at the positive input to vary during the actual A/D conversion. The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes. The voltage reference input canbe adjusted to allow encoding of small analog voltage spans to the full 8-bits of resolution.

Certification