ADI AD9215BCP-80

Part Number:: AD9215BCP-80

Manufacturer:: ADI

Ventron No:: 5143223-AD9215BCP-80

Description:: 10-Bit, 65/80/105 MSPS, 3V A/D Converter

ECAD Model:

Datasheet:: AD9215BCP-80

Specifications

ADI AD9215BCP-80 technical specifications, attributes, parameters and parts with similar specifications to ADI AD9215BCP-80.

Mounting Type
Surface Mount
Package / Case
32-WFQFN Exposed Pad, CSP
Surface Mount
YES
Operating Temperature
-40°C~85°C
Packaging
Tray
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
32
Terminal Finish
TIN LEAD
Technology
CMOS
Terminal Position
QUAD
Terminal Form
NO LEAD
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3V
Terminal Pitch
0.5mm
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
32
JESD-30 Code
S-XQCC-N32
Number of Bits
10
Converter Type
ADC, FLASH METHOD
Data Interface
Parallel
Sampling Rate
80 MHz
Number of Analog In Channels
1
Sampling Rate (Per Second)
80M
Output Bit Code
OFFSET BINARY, 2'S COMPLEMENT BINARY
Sample and Hold / Track and Hold
SAMPLE
Number of A/D Converters
1
Length
5mm
Width
5mm
RoHS Status
Non-RoHS Compliant

Description

AD9215BCP-80 Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 32-WFQFN Exposed Pad, CSP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 32 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The is equipped with 32 pin count.The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 80M Hz.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.

AD9215BCP-80 Features
1 Functions
32 basic kinds of terminations
32 pin count

AD9215BCP-80 Applications
There are a lot of Rochester Electronics, LLC
AD9215BCP-80 ADC applications.

Digital Multimeters, PLC's (Programming Logic Controllers)
RADAR processing, digital oscilloscopes
CMOS Image sensors for mobile applications
Medical Instrumentation and medical imaging
Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer

AD9215BCP-80 More Descriptions

CONVERTER 10 Bit Low Power 65/80/105 Msps ADC
Single ADC Pipelined 80Msps 10-bit Parallel 32-Pin LFCSP EP Tray
The AD9215 is a family of monolithic, single 3 V supply, 10-bit, 65/80/105 MSPS analog-to-digital converters. This family features a high-performance sample-and-hold amplifier and voltage reference. The AD9215 uses a multistage differential pipelined architecture with output error correction logic to provide 10-bit accuracy at 105 MSPS data rates and guarantee no missing codes over the full operating temperature range. The wide-bandwidth, truly differential sample and hold amplifier (SHA) allows for a variety of user-selectable input ranges and offsets including single-ended applications. It is suitable for multiplexed systems that switch full-scale voltage levels in successive channels and for sampling single-channel inputs at frequencies well beyond the Nyquist range. Combined with power and cost savings over previously available analog-to-digital converters, the AD9215 is suitable for applications in communications, imaging, and medical ultrasound. A single-ended clock input is used to control all internal conversion cycles. A duty cycle stabilizer compensates for wide variations in the clock duty cycle while maintaining excellent performance. The digital output data is presented in straight binary or twos complement formats. An out-of-range signal indicates an overflow condition, which can be used with the most significant bit to determine low or high overflow. Fabricated on an advanced CMOS process, the AD9215 is available in both a 28-lead surface-mount plastic package and a 32-lead chip-scale package, and is specified over the industrial temperature range (-40°C to 85°C).

Certification