Analog Devices Inc. AD8202WYC-P3
- Part Number:
- AD8202WYC-P3
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3194899-AD8202WYC-P3
- Description:
- IC OPAMP DIFF 50KHZ
- Datasheet:
- AD8202WYC-P3
Analog Devices Inc. AD8202WYC-P3 technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD8202WYC-P3.
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / CaseDie
- Number of Pins0
- Operating Temperature-40°C~125°C
- PackagingBulk
- Pbfree Codeno
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations8
- ECCN CodeEAR99
- SubcategoryOperational Amplifier
- Terminal PositionUPPER
- Terminal FormNO LEAD
- Number of Functions1
- Supply Voltage5V
- Reach Compliance Codeunknown
- Base Part NumberAD8202
- Pin Count0
- JESD-30 CodeR-XUUC-N8
- Number of Circuits1
- Operating Supply Current250μA
- Nominal Supply Current250μA
- Slew Rate0.28V/μs
- Amplifier TypeDifferential
- Common Mode Rejection Ratio82 dB
- Current - Input Bias40nA
- Voltage - Supply, Single/Dual (±)3.5V~12V
- Input Offset Voltage (Vos)1mV
- Gain Bandwidth Product50kHz
- Voltage - Input Offset2mV
- RoHS StatusNon-RoHS Compliant
- Lead FreeContains Lead
AD8202WYC-P3 Overview
It is packaged in an Die-case that protects the operational amplifiers from damage. An op amp of this type is a Differential-type. As far as the packaging is concerned, buffer op amp is delivered in a Bulk case. It is estimated that there will be at least 8 terminations this year. A total of 0 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 0 pins. Op amp ic rates 1mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 250μA can be used to operate this linear amplifier. This op amp ic has 1 circuits.
AD8202WYC-P3 Features
0 Pins
supply voltage of 5V
AD8202WYC-P3 Applications
There are a lot of Analog Devices Inc.
AD8202WYC-P3 Instrumentational OP Amps applications.
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
It is packaged in an Die-case that protects the operational amplifiers from damage. An op amp of this type is a Differential-type. As far as the packaging is concerned, buffer op amp is delivered in a Bulk case. It is estimated that there will be at least 8 terminations this year. A total of 0 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 0 pins. Op amp ic rates 1mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 250μA can be used to operate this linear amplifier. This op amp ic has 1 circuits.
AD8202WYC-P3 Features
0 Pins
supply voltage of 5V
AD8202WYC-P3 Applications
There are a lot of Analog Devices Inc.
AD8202WYC-P3 Instrumentational OP Amps applications.
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
AD8202WYC-P3 More Descriptions
Operational Amplifier, 1 Func, 3000uV Offset-Max
IC OP AMP DIFFERENTIAL 50KHZ DIE
The AD8202 is a single-supply difference amplifier for amplifying and low-pass filtering small differential voltages in the presence of a large common-mode voltage (CMV). The input CMV range extends from −8 V to 28 V at a typical supply voltage of 5 V. The AD8202 is available in die and packaged form. The MSOP and SOIC packages are specified over a wide temperature range, from −40°C to 125°C, making the AD8202 well-suited for use in many automotive platforms. Automotive platforms demand precision components for better system control. The AD8202 provides excellent ac and dc performance keeping errors to a minimum in the user’s system. Typical offset and gain drift in the SOIC package are 0.3 µV/°C and 1 ppm/°C, respectively. Typical offset and gain drift in the MSOP package are 2 µV/°C and 1 ppm/°C, respec¬tively. The device also delivers a minimum CMRR of 80 dB from dc to 10 kHz. The AD8202 features an externally accessible 100 kΩ resistor at the output of the Preamp A1 that can be used for low-pass filter applications and for establishing gains other than 20. Applications Transmission control Diesel injection control Engine management Adaptive suspension control Vehicle dynamics control
IC OP AMP DIFFERENTIAL 50KHZ DIE
The AD8202 is a single-supply difference amplifier for amplifying and low-pass filtering small differential voltages in the presence of a large common-mode voltage (CMV). The input CMV range extends from −8 V to 28 V at a typical supply voltage of 5 V. The AD8202 is available in die and packaged form. The MSOP and SOIC packages are specified over a wide temperature range, from −40°C to 125°C, making the AD8202 well-suited for use in many automotive platforms. Automotive platforms demand precision components for better system control. The AD8202 provides excellent ac and dc performance keeping errors to a minimum in the user’s system. Typical offset and gain drift in the SOIC package are 0.3 µV/°C and 1 ppm/°C, respectively. Typical offset and gain drift in the MSOP package are 2 µV/°C and 1 ppm/°C, respec¬tively. The device also delivers a minimum CMRR of 80 dB from dc to 10 kHz. The AD8202 features an externally accessible 100 kΩ resistor at the output of the Preamp A1 that can be used for low-pass filter applications and for establishing gains other than 20. Applications Transmission control Diesel injection control Engine management Adaptive suspension control Vehicle dynamics control
The three parts on the right have similar specifications to AD8202WYC-P3.
-
ImagePart NumberManufacturerMountMounting TypePackage / CaseNumber of PinsOperating TemperaturePackagingPbfree CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsECCN CodeSubcategoryTerminal PositionTerminal FormNumber of FunctionsSupply VoltageReach Compliance CodeBase Part NumberPin CountJESD-30 CodeNumber of CircuitsOperating Supply CurrentNominal Supply CurrentSlew RateAmplifier TypeCommon Mode Rejection RatioCurrent - Input BiasVoltage - Supply, Single/Dual (±)Input Offset Voltage (Vos)Gain Bandwidth ProductVoltage - Input OffsetRoHS StatusLead FreeLifecycle StatusFactory Lead TimeContact PlatingSurface MountJESD-609 CodePacking MethodMax Power DissipationTechnologyPeak Reflow Temperature (Cel)Time@Peak Reflow Temperature-Max (s)Qualification StatusOutput TypeNumber of ChannelsPower DissipationQuiescent CurrentSupply Current-MaxArchitectureOutput Current per ChannelNeg Supply Voltage-Nom (Vsup)Unity Gain BW-NomVoltage GainAverage Bias Current-Max (IIB)Power Supply Rejection Ratio (PSRR)Low-OffsetFrequency CompensationSettling TimeLow-BiasMicropowerProgrammable PowerInput CapacitanceWidebandInput Voltage Noise DensityLengthSeriesResistanceReflow Temperature-Max (s)Operating Supply VoltageNumber of ElementsPower SuppliesHeightWidthBandwidthBias Current-Max (IIB) @25CDual Supply VoltageREACH SVHCRadiation HardeningView Compare
-
AD8202WYC-P3Surface MountSurface MountDie0-40°C~125°CBulknoObsolete1 (Unlimited)8EAR99Operational AmplifierUPPERNO LEAD15VunknownAD82020R-XUUC-N81250μA250μA0.28V/μsDifferential82 dB40nA3.5V~12V1mV50kHz2mVNon-RoHS CompliantContains Lead-----------------------------------------------
-
-Surface Mount8-SOIC (0.154, 3.90mm Width)8-40°C~85°CTape & Reel (TR)noActive1 (Unlimited)8EAR99Operational AmplifierDUALGULL WING15V-AD8208--900μA-3V/μsJ-FET80 dB2pA5V~36V ±2.5V~18V1mV1.9MHz300μVROHS3 CompliantContains LeadPRODUCTION (Last Updated: 4 weeks ago)14 WeeksTinYESe3TAPE AND REEL1WBIPOLAR26030Not QualifiedRail-to-Rail11W900μA0.9mAVOLTAGE-FEEDBACK20mA-5V1800 kHz120dB0.0025μA80dBNOYES4.5 μsYESYESNO2.8pFNO25nV/sqrt Hz4.9mm-------------
-
Surface MountSurface Mount8-SOIC (0.154, 3.90mm Width)8-40°C~125°CTubenoActive1 (Unlimited)8EAR99Operational AmplifierDUALGULL WING15V-AD82068--2mA2mA0.5V/μsDifferential76 dB-4.5V~5.5V2mV100 kHz2mVROHS3 CompliantContains LeadPRODUCTION (Last Updated: 1 week ago)8 WeeksTin-e3---260-Not Qualified---------26.02dB-70dB---------5mmAutomotive400kOhm305V15V1.5mm4mm-----
-
-Surface Mount8-SOIC (0.154, 3.90mm Width)8-40°C~85°CTubenoObsolete1 (Unlimited)8EAR99Operational AmplifierDUALGULL WING15V-AD8208--900μA900μA3V/μsJ-FET80 dB2pA5V~36V ±2.5V~18V1mV1.8MHz400μVNon-RoHS CompliantContains Lead--Lead, TinYESe0-1WBIPOLAR24030-Rail-to-Rail11W900μA-VOLTAGE-FEEDBACK20mA-5V1900 kHz120dB0.005μA80dBNOYES4.5 μsYESYESNO2.8pF-25nV/sqrt Hz5mm---9V--1.5mm4mm1.9MHz0.000025μA3VNo SVHCNo
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
06 September 2023
TDA8356 Specifications, Characteristics and Application Circuits
Ⅰ. Overview of TDA8356TDA8356 is a new field scanning output integrated circuit produced by Philips of the Netherlands. It is widely used in various domestic and imported large-screen... -
06 September 2023
All You Need to Know About MPS2222A
Ⅰ. Overview of MPS2222AMPS2222A is an NPN transistor produced by Fairchild Semiconductor. Its main features include power dissipation of 0.625W; collector current of 0.6A; maximum withstand voltage of... -
06 September 2023
A4988 Characteristics, Application and Basic Principle
A4988 is an efficient and commonly used stepper motor driver chip, widely used in 3D printing and CNC machine tools and other fields. We will discuss in depth... -
07 September 2023
What Is The Difference Between NE5532 And RC4558D?
Ⅰ. Overview of NE5532NE5532 is a dual operational amplifier chip with excellent performance and low noise characteristics. Its circuit design is similar to that of a common operational...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.