Analog Devices Inc. AD7923SRU-EP

Name: AD7923SRU-EP
Brand: Analog Devices Inc.
SKU: 3010789-AD7923SRU-EP
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: AD7923SRU-EP

Manufacturer:: Analog Devices Inc.

Ventron No:: 3010789-AD7923SRU-EP

Description:: IC ADC 12BIT 4CH W/SEQ 16TSSOP

ECAD Model:

Datasheet:: AD7923SRU-EP

Specifications

Analog Devices Inc. AD7923SRU-EP technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD7923SRU-EP.

Mounting Type
Surface Mount
Package / Case
16-TSSOP (0.173, 4.40mm Width)
Supplier Device Package
16-TSSOP
Operating Temperature
-40°C~125°C
Packaging
Tube
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Configuration
MUX-S/H-ADC
Number of Bits
12
Input Type
Single Ended
Architecture
SAR
Number of Inputs
4
Reference Type
External
Data Interface
SPI, DSP
Voltage - Supply, Analog
2.7V~5.25V
Voltage - Supply, Digital
2.7V~5.25V
Sampling Rate (Per Second)
200k
Number of A/D Converters
1
Ratio - S/H:ADC
1:1
RoHS Status
Non-RoHS Compliant

Description

AD7923SRU-EP Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 16-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 2.7V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.4 inputs are employed.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. It employs 16-TSSOP as its supplier device package.

AD7923SRU-EP Features

AD7923SRU-EP Applications
There are a lot of Rochester Electronics, LLC
AD7923SRU-EP ADC applications.

Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
Scientific instruments.
Music reproduction technology

AD7923SRU-EP More Descriptions

Quad Channel Single ADC SAR 200ksps 12-bit Serial 16-Pin TSSOP Tube
IC ADC 12BIT 4CH W/SEQ 16TSSOP
The AD7923 is a 12-bit, high speed, low power, 4-channel, successive-approximation (SAR) ADC. It operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 200 kSPS. It contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 8 MHz. The conversion process and data acquisition are controlled by CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS and conversion is also initiated at this point. The AD7923 uses advanced design techniques to achieve very low power dissipation at maximum throughput rates. At maximum throughput rates, it consumes 1.2 mA maximum with 3 V supplies and 1.5 mA maximum with 5 V supplies. Through the configuration of the control register, the analog input range can be selected as 0 V to REFIN or 0 V to 2 × REFIN, with either straight binary or twos complement output coding. The AD7923 features four single-ended analog inputs with a channel sequencer to allow a preprogrammed selection of channels to be converted sequentially. The conversion time for the AD7923 is determined by the serial clock, SCLK, frequency, since this is used as the master clock to control the conversion. The conversion time can be as short as 800 ns with a 20 MHz SCLK.

Certification