ADI AD7791BRM-REEL

Part Number:: AD7791BRM-REEL

Manufacturer:: ADI

Ventron No:: 5147853-AD7791BRM-REEL

Description:: Low Power, Buffered 24-Bit Sigma-Delta ADC

ECAD Model:

Datasheet:: AD7791BRM-REEL

Specifications

ADI AD7791BRM-REEL technical specifications, attributes, parameters and parts with similar specifications to ADI AD7791BRM-REEL.

Package / Case
MSOP
Surface Mount
YES
Number of Pins
10
Packaging
Tape & Reel (TR)
JESD-609 Code
e0
Pbfree Code
no
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
10
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn/Pb)
HTS Code
8542.39.00.01
Subcategory
Analog to Digital Converters
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3V
Terminal Pitch
0.5mm
Reach Compliance Code
not_compliant
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
10
Qualification Status
Not Qualified
Operating Temperature (Min)
-40°C
Power Supplies
3/5V
Temperature Grade
INDUSTRIAL
Power Dissipation
800μW
Number of Bits
24
Converter Type
ADC, DELTA-SIGMA
Resolution
3 B
Number of Analog In Channels
1
Output Bit Code
OFFSET BINARY
Linearity Error-Max (EL)
0.0015%
Analog Input Voltage-Max
2.5V
Output Format
SERIAL
Analog Input Voltage-Min
-2.5V
Source Url Status Check Date
2013-05-01 14:56:20.44
Length
3mm
Height Seated (Max)
1.1mm
Width
3mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead

Description

AD7791BRM-REEL Overview
The analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the MSOP package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The number of pixels of this electrical AD converter is 3 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The maximal analog input voltage of this electrical AD converter is 2.5V.The ADC converter operates from 3/5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 800μW.The minimal analog input voltage of this electrical AD converter is -2.5V.The minimal operating temperature should exceed -40°C.

AD7791BRM-REEL Features
1 Functions
10 basic kinds of terminations
10 pin count
3/5V power supplies

AD7791BRM-REEL Applications
There are a lot of Analog Devices, Inc.
AD7791BRM-REEL ADC applications.

Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
Scientific instruments.
Music reproduction technology
Communication Systems

AD7791BRM-REEL More Descriptions

ADC Single Delta-Sigma 120sps 24-bit Serial 10-Pin MSOP T/R
The AD7790/AD7791 are low-power, complete analog front ends for low frequency measurement applications. The device consumes 65 µA of current typically when operated with a 3 V power supply and 75 µA typical when operated with a 5 V power supply with the buffer disabled. The AD7791 contains a 24-bit S-D ADC with one differential input, which can be buffered or unbuffered. The AD7790 is a 16-bit version of the AD7791. The AD7790 has a peak-to-peak resolution of 16 bits at the default output data rate of 16.6 Hz while the AD7789 has a peak to peak resolution of 19 bits, which is equivalent to an effective resolution of 21.5 bits at this output data rate. The device operates from an internal clock. Therefore, the user does not have to supply a clock source to the device. The output data rate from the part is software programmable, allowing rates from 9.5 Hz to 120 Hz. The p-p resolution from the part varies with the programmed output data rate. With an output data rate of 16.6 Hz, simultaneous 50 Hz/60 Hz rejection is achieved. Power supply monitoring is also included. The part can be used in single conversion mode whereby the device powers up, performs a single conversion and then returns to powerdown mode. Alternatively, it can be operated in continuous mode. In continuous conversion mode, the part can be configured to continuously read i.e. the conversions are placed on the serial bus automatically as soon as a conversion is complete (the user does not need to write to the ADC to read the data), assuming that the serial clock is applied to the device. The AD7790/AD7791 is housed in a 10-lead MSOP package.

Certification