Analog Devices Inc. AD7264BSTZ-5
- Part Number:
- AD7264BSTZ-5
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3013016-AD7264BSTZ-5
- Description:
- IC ADC 14BIT 2CH 500KSPS 48LQFP
- Datasheet:
- AD7264BSTZ-5
Analog Devices Inc. AD7264BSTZ-5 technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD7264BSTZ-5.
- Mounting TypeSurface Mount
- Package / Case48-LQFP
- Surface MountYES
- Number of Pins48
- Operating Temperature-40°C~105°C
- PackagingTray
- JESD-609 Codee3
- FeaturePGA, Simultaneous Sampling
- Pbfree Codeno
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)3 (168 Hours)
- Number of Terminations48
- ECCN CodeEAR99
- Terminal FinishMATTE TIN
- SubcategoryAnalog to Digital Converters
- Max Power Dissipation175mW
- Terminal PositionQUAD
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)225
- Number of Functions2
- Supply Voltage5V
- Terminal Pitch0.5mm
- Reflow Temperature-Max (s)NOT SPECIFIED
- Base Part NumberAD7264
- Pin Count48
- Qualification StatusNot Qualified
- Operating Supply Voltage5V
- ConfigurationPGA-S/H-ADC
- Number of Channels2
- InterfaceSPI
- Max Supply Voltage5.25V
- Min Supply Voltage4.75V
- Power Dissipation175mW
- Number of Bits14
- Input TypeDifferential
- Min Input Voltage2.5V
- ArchitectureSAR
- Max Input Voltage2.5V
- Converter TypeADC, SUCCESSIVE APPROXIMATION
- Reference TypeExternal, Internal
- Data InterfaceSPI, DSP
- Resolution1.75 B
- Sampling Rate500 ksps
- Voltage - Supply, Analog5V
- Voltage - Supply, Digital2.7V~5.25V
- Number of Analog In Channels2
- Sampling Rate (Per Second)500k
- Power Consumption120mW
- Linearity Error-Max (EL)0.0183%
- Integral Nonlinearity (INL)3 LSB
- Sample and Hold / Track and HoldTRACK
- Input Capacitance5pF
- Ratio - S/H:ADC1:1
- Output FormatSERIAL
- Signal to Noise Ratio (SNR)78 dB
- Differential Nonlinearity0.99 LSB
- Conversion Time-Max0.53μs
- Height Seated (Max)1.6mm
- Length7mm
- Width7mm
- REACH SVHCNo SVHC
- RoHS StatusROHS3 Compliant
- Lead FreeContains Lead
AD7264BSTZ-5 Overview
This product features a tray packaging and is equipped with a PGA (Programmable Gain Amplifier) for precise and accurate measurements. With simultaneous sampling capability, it allows for efficient and synchronized data collection. However, please note that this product is currently in an obsolete status. It offers 48 terminations and a maximum power dissipation of 175mW. The pin count is 48 and it is designed with an SPI (Serial Peripheral Interface) for data transfer. The data interface includes SPI and DSP (Digital Signal Processing) for versatile usage. Its conversion time is at a maximum of 0.53μs, ensuring fast and reliable results. Furthermore, this product is compliant with the latest RoHS (Restriction of Hazardous Substances) regulations.
AD7264BSTZ-5 Features
2 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 4.75V
AD7264BSTZ-5 Applications
There are a lot of Analog Devices Inc. AD7264BSTZ-5 ADC applications.
Communications
In-building wireless telephony
Broadband data applications
Industrial Process Control
Cell Phones
Smart antenna systems
Rotary encoder
Multiplexed Data Acquisition Systems
Medical Instrumentation and medical imaging
Music recording
This product features a tray packaging and is equipped with a PGA (Programmable Gain Amplifier) for precise and accurate measurements. With simultaneous sampling capability, it allows for efficient and synchronized data collection. However, please note that this product is currently in an obsolete status. It offers 48 terminations and a maximum power dissipation of 175mW. The pin count is 48 and it is designed with an SPI (Serial Peripheral Interface) for data transfer. The data interface includes SPI and DSP (Digital Signal Processing) for versatile usage. Its conversion time is at a maximum of 0.53μs, ensuring fast and reliable results. Furthermore, this product is compliant with the latest RoHS (Restriction of Hazardous Substances) regulations.
AD7264BSTZ-5 Features
2 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 4.75V
AD7264BSTZ-5 Applications
There are a lot of Analog Devices Inc. AD7264BSTZ-5 ADC applications.
Communications
In-building wireless telephony
Broadband data applications
Industrial Process Control
Cell Phones
Smart antenna systems
Rotary encoder
Multiplexed Data Acquisition Systems
Medical Instrumentation and medical imaging
Music recording
AD7264BSTZ-5 More Descriptions
Dual ADC SAR 500ksps 14-bit Serial 48-Pin LQFP Tray
Analog to Digital Converters - ADC True Diff Dual 1MSPS 14-Bit 2-Ch SAR
The AD7264 is a dual, 14-bit, high speed, low power, successive approximation ADC that operates from a single 5 V power supply and features throughput rates of up to 1 MSPS per on-chip ADC (500 kSPS for the AD7264-5). Two complete ADC functions allow simultaneous sampling and conversion of two channels. Each ADC is preceded by a true differential analog input with a PGA. There are 14 gain settings available: ×1, ×2, ×3, ×4, ×6, ×8, ×12, ×16, ×24, ×32, ×48, ×64, ×96, and ×128. The AD7264 contains four comparators. Comparator A and Comparator B are optimized for low power, whereas Comparator C and Comparator D have fast propagation delays. The AD7264 features a calibration function to remove any device offset error and programmable gain adjust registers to allow input path (for example, sensor) offset and gain compensation. The AD7264 has an on-chip 2.5 V reference that can be disabled if an external reference is preferred. The AD7264 is available in 48-lead LFCSP and LQFP packages. The AD7264 is ideally suited for monitoring small amplitude signals from a variety of sensors. The devices include all the functionality needed for monitoring the position feedback signals from a variety of analog encoders used in motor control systems. Product Highlights Integrated PGA with a variety of flexible gain settings to allow detection and conversion of low level analog signals. Each PGA is followed by a dual simultaneous sampling ADC, featuring throughput rates of 1 MSPS per ADC (500 kSPS for the AD7264-5). The conversion result of both ADCs is simultaneously available on separate data lines or in succession on one data line if only one serial port is available. Four integrated comparators that can be used to count signals from pole sensors in motor control applications. Internal 2.5 V reference.
Analog to Digital Converters - ADC True Diff Dual 1MSPS 14-Bit 2-Ch SAR
The AD7264 is a dual, 14-bit, high speed, low power, successive approximation ADC that operates from a single 5 V power supply and features throughput rates of up to 1 MSPS per on-chip ADC (500 kSPS for the AD7264-5). Two complete ADC functions allow simultaneous sampling and conversion of two channels. Each ADC is preceded by a true differential analog input with a PGA. There are 14 gain settings available: ×1, ×2, ×3, ×4, ×6, ×8, ×12, ×16, ×24, ×32, ×48, ×64, ×96, and ×128. The AD7264 contains four comparators. Comparator A and Comparator B are optimized for low power, whereas Comparator C and Comparator D have fast propagation delays. The AD7264 features a calibration function to remove any device offset error and programmable gain adjust registers to allow input path (for example, sensor) offset and gain compensation. The AD7264 has an on-chip 2.5 V reference that can be disabled if an external reference is preferred. The AD7264 is available in 48-lead LFCSP and LQFP packages. The AD7264 is ideally suited for monitoring small amplitude signals from a variety of sensors. The devices include all the functionality needed for monitoring the position feedback signals from a variety of analog encoders used in motor control systems. Product Highlights Integrated PGA with a variety of flexible gain settings to allow detection and conversion of low level analog signals. Each PGA is followed by a dual simultaneous sampling ADC, featuring throughput rates of 1 MSPS per ADC (500 kSPS for the AD7264-5). The conversion result of both ADCs is simultaneously available on separate data lines or in succession on one data line if only one serial port is available. Four integrated comparators that can be used to count signals from pole sensors in motor control applications. Internal 2.5 V reference.
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
27 December 2023
Applications and Usage of IR2011STRPBF Isolated Gate Driver
Ⅰ. What is a gate driver?Ⅱ. Introduction to IR2011STRPBFⅢ. Dimensions and package of IR2011STRPBFⅣ. Technical parameters of IR2011STRPBFⅤ. Who produces the IR2011STRPBF?Ⅵ. Absolute maximum ratings of IR2011STRPBFⅦ. Where... -
28 December 2023
TMS320F28335PGFA Microcontroller: Where and How to Use It?
Ⅰ. TMS320F28335PGFA descriptionⅡ. Characteristics of TMS320F28335PGFAⅢ. Specifications and performance indicators of TMS320F28335PGFAⅣ. Programming method of TMS320F28335PGFAⅤ. TMS320F28335PGFA priceⅥ. How to use TMS320F28335PGFA?Ⅶ. Where is TMS320F28335PGFA used?Ⅷ. What are... -
28 December 2023
74HC573 Transparent Latch Functions, Working Principle, Usage and Application
Ⅰ. What is a latch?Ⅱ. Overview of 74HC573Ⅲ. Pin configuration of 74HC573 latchⅣ. Functions of 74HC573 latchⅤ. How does 74HC573 latch work?Ⅵ. How to use 74HC573 latch?Ⅶ. Practical... -
29 December 2023
An Introduction to HEF4093BP CMOS NAND Schmitt Trigger
Ⅰ. What is HEF4093BP?Ⅱ. Symbol, footprint and 3D model of HEF4093BPⅢ. The specifications of HEF4093BPⅣ. Limiting values of HEF4093BPⅤ. How does HEF4093BP work?Ⅵ. HEF4093BP's market trendⅦ. Where is...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.