AD633JN

Analog Devices Inc. AD633JN

Part Number:
AD633JN
Manufacturer:
Analog Devices Inc.
Ventron No:
3195329-AD633JN
Description:
IC ANALOG MULTIPLIER 8-DIP
ECAD Model:
Datasheet:
AD633JN

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Analog Devices Inc. AD633JN technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD633JN.
  • Package / Case
    8-DIP (0.300, 7.62mm)
  • Number of Pins
    8
  • Supplier Device Package
    8-PDIP
  • Packaging
    Tube
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    3 (168 Hours)
  • Function
    Analog Multiplier
  • Output Voltage
    11V
  • Number of Bits/Stages
    4-Quadrant
  • RoHS Status
    Non-RoHS Compliant
Description
AD633JN Overview
This product is packaged with Tube.For cost-effectiveness, it has been included in the 8-DIP (0.300, 7.62mm) package.There is a widespread use of 4-Quadrant bits per stage.Known for its superior performance and high quality, it is a type of 8-pin electronic component.11V is the voltage that is released from the output end.

AD633JN Features
Supplied in the 8-DIP (0.300, 7.62mm) package

AD633JN Applications
There are a lot of Rochester Electronics, LLC AD633JN Analog Multipliers & Dividers applications.

Measurements of Wheatstone bridge
Precision measurement
Power control
Tablets
Displayers for aircraft and air transportation control systems
Instrumentation
Industrial applications including automation
Communication
Automation control systems
Digital cameras
AD633JN More Descriptions
Analog Multiplier Or Divider, 1 Func, 1MHz Band Width, BIPolar, PDIP8
IC AD633JN Low Cost Analog Multiplier Four-Quadrant Multiplication 18V 500mW
Analog Multiplier 4-Bit 8-Pin PDIP N Tube
Special Purpose Amplifiers ANALOG MULTIPLIER IC
French Electronic Distributor since 1988
The AD633 is a functionally complete, four-quadrant, analog multiplier. It includes high impedance, differential X and Y inputs, and a high impedance summing input (Z). The low impedance output voltage is a nominal 10 V full scale provided by a buried Zener. The AD633 is the first product to offer these features in modestly priced 8-lead PDIP and SOIC packages. The AD633 is laser calibrated to a guaranteed total accuracy of 2% of full scale. Nonlinearity for the Y input is typically less than 0.1% and noise referred to the output is typically less than 100 µV rms in a 10 Hz to 10 kHz bandwidth. A 1 MHz bandwidth, 20 V/µs slew rate, and the ability to drive capacitive loads make the AD633 useful in a wide variety of applications where simplicity and cost are key concerns. The versatility of the AD633 is not compromised by its simplicity. The Z input provides access to the output buffer amplifier, enabling the user to sum the outputs of two or more multipliers, increase the multiplier gain, convert the output voltage to a current, and configure a variety of applications. The AD633 is available in 8-lead PDIP and SOIC packages. It is specified to operate over the 0°C to 70°C commercial temperature range (J Grade) or the -40°C to 85°C industrial temperature range (A Grade). PRODUCT HIGHLIGHTS The AD633 is a complete four-quadrant multiplier offered in low cost 8-lead SOIC and PDIP packages. The result is a product that is cost effective and easy to apply. No external components or expensive user calibration are required to apply the AD633. Monolithic construction and laser calibration make the device stable and reliable. High (10 MO) input resistances make signal source loading negligible. Power supply voltages can range from ±8 V to ±18 V. The internal scaling voltage is generated by a stable Zener diode; multiplier accuracy is essentially supply insensitive. APPLICATIONS Multiplication, division, squaring Modulation/demodulation, phase detection Voltage-controlled amplifiers/attenuators/filters
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.