Analog Devices Inc. AD5300BRT-REEL
- Part Number:
- AD5300BRT-REEL
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3628093-AD5300BRT-REEL
- Description:
- IC DAC 8BIT R-R 2.7-5.5V SOT23-6
- Datasheet:
- AD5300
Analog Devices Inc. AD5300BRT-REEL technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD5300BRT-REEL.
- Mounting TypeSurface Mount
- Package / CaseSOT-23-6
- Surface MountYES
- Operating Temperature-40°C~105°C
- PackagingTape & Reel (TR)
- JESD-609 Codee0
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations6
- ECCN CodeEAR99
- SubcategoryOther Converters
- TechnologyCMOS
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)240
- Number of Functions1
- Supply Voltage3V
- Terminal Pitch0.95mm
- Reflow Temperature-Max (s)30
- Base Part NumberAD5300
- Pin Count6
- JESD-30 CodeR-PDSO-G6
- Output TypeVoltage - Buffered
- Power Supplies3/5V
- Number of Bits8
- Supply Current-Max0.25mA
- ArchitectureString DAC
- Converter TypeD/A CONVERTER
- Reference TypeSupply
- Data InterfaceSPI, DSP
- Differential OutputNo
- Voltage - Supply, Analog2.7V~5.5V
- Voltage - Supply, Digital2.7V~5.5V
- Settling Time6μs
- Linearity Error-Max (EL)0.3906%
- Input Bit CodeBINARY
- INL/DNL (LSB)±1 (Max), ±0.25 (Max)
- Input FormatSERIAL
- Number of D/A Converters1
- Analog Output Voltage-Max5.5V
- Length2.9mm
- RoHS StatusNon-RoHS Compliant
AD5300BRT-REEL Overview
There are two packages that contain it: SOT-23-6 package and X package. The supply voltage is 3V volts. In this case, the FPGA part belongs to the Other Converters family. An attachment Surface Mount allows the FPGA module to be attached to the development board. When operating the machine, it is important to keep the temperature within -40°C~105°C range. There is an FPGA model contained in Tape & Reel (TR) in order to conserve space. In total, it has 6 terminations on each end. In order to find related parts, use the part number AD5300 as a base. The device runs on a 3/5V battery and requires no additional power supply to operate. This device has a pin count of 6 in it.
AD5300BRT-REEL Features
SOT-23-6 package
6 pin count
AD5300BRT-REEL Applications
There are a lot of Analog Devices Inc.
AD5300BRT-REEL Digital to Analog Converters (DAC) applications.
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
Instrumentation:
RF signal generators, arbitrary waveform generators
Mobile Communications
Process Control and Industrial Automation
There are two packages that contain it: SOT-23-6 package and X package. The supply voltage is 3V volts. In this case, the FPGA part belongs to the Other Converters family. An attachment Surface Mount allows the FPGA module to be attached to the development board. When operating the machine, it is important to keep the temperature within -40°C~105°C range. There is an FPGA model contained in Tape & Reel (TR) in order to conserve space. In total, it has 6 terminations on each end. In order to find related parts, use the part number AD5300 as a base. The device runs on a 3/5V battery and requires no additional power supply to operate. This device has a pin count of 6 in it.
AD5300BRT-REEL Features
SOT-23-6 package
6 pin count
AD5300BRT-REEL Applications
There are a lot of Analog Devices Inc.
AD5300BRT-REEL Digital to Analog Converters (DAC) applications.
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
Instrumentation:
RF signal generators, arbitrary waveform generators
Mobile Communications
Process Control and Industrial Automation
AD5300BRT-REEL More Descriptions
DAC 1-CH Resistor-String 8-bit 6-Pin SOT-23 T/R
IC DAC 8BIT R-R 2.7-5.5V SOT23-6
The AD5300 is a single, 8-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply consuming 115 µA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved.The AD5300 utilizes a versatile three-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI™,QSPI™,MICROWIRE™ and DSP interface standards. Product Highlights Available in 6-lead SOT-23 and 8-lead MicroSOIC packages. Low power, single supply operation from 2.7 V to 5.5 V supply Consumes 0.35 mW at 3 V and 0.7 mW at 5 V Rail-to-Rail output with a slew rate of 1 V/µs. Reference derived from the power supply. High speed serial interface with clock speeds up to 30 MHz. Pin and Software Compatible with the AD5300 (8-Bit) and the AD5320 (12-bit) The reference for AD5300 is derived from the power supply inputs and thus gives the widest dynamic output range.The part incorporates a power-on-reset circuit that ensures that the DAC output powers up to zero volts and remains there until a valid write takes place to the device.The part contains a power-down feature that reduces the current consumption of the device to 200 nA at 5 V and provides software selectable output loads while in power-down mode.The part is put into power-down mode over the serial interface. The low power consumption of this part in normal operation makes it ideally suited to portable battery operated equipment. The power consumption is 0.7 mW at 5 V reducing to 1 µW in power-down mode. The AD5300 is one of a family of pin-compatible DACs. The AD5310 is the 10-bit version and the AD5320 is the 12-bit version.The AD5300/AD5310/AD5320 are available in 6-lead SOT-23 packages and 8-lead µSOIC packages. Related Products AD5601 2.7 V to 5.5 V, <100 µA, 8-Bit nanoDAC™ D/A Converter, SPI Interface, SC70 Package
IC DAC 8BIT R-R 2.7-5.5V SOT23-6
The AD5300 is a single, 8-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply consuming 115 µA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved.The AD5300 utilizes a versatile three-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI™,QSPI™,MICROWIRE™ and DSP interface standards. Product Highlights Available in 6-lead SOT-23 and 8-lead MicroSOIC packages. Low power, single supply operation from 2.7 V to 5.5 V supply Consumes 0.35 mW at 3 V and 0.7 mW at 5 V Rail-to-Rail output with a slew rate of 1 V/µs. Reference derived from the power supply. High speed serial interface with clock speeds up to 30 MHz. Pin and Software Compatible with the AD5300 (8-Bit) and the AD5320 (12-bit) The reference for AD5300 is derived from the power supply inputs and thus gives the widest dynamic output range.The part incorporates a power-on-reset circuit that ensures that the DAC output powers up to zero volts and remains there until a valid write takes place to the device.The part contains a power-down feature that reduces the current consumption of the device to 200 nA at 5 V and provides software selectable output loads while in power-down mode.The part is put into power-down mode over the serial interface. The low power consumption of this part in normal operation makes it ideally suited to portable battery operated equipment. The power consumption is 0.7 mW at 5 V reducing to 1 µW in power-down mode. The AD5300 is one of a family of pin-compatible DACs. The AD5310 is the 10-bit version and the AD5320 is the 12-bit version.The AD5300/AD5310/AD5320 are available in 6-lead SOT-23 packages and 8-lead µSOIC packages. Related Products AD5601 2.7 V to 5.5 V, <100 µA, 8-Bit nanoDAC™ D/A Converter, SPI Interface, SC70 Package
The three parts on the right have similar specifications to AD5300BRT-REEL.
-
ImagePart NumberManufacturerMounting TypePackage / CaseSurface MountOperating TemperaturePackagingJESD-609 CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsECCN CodeSubcategoryTechnologyTerminal PositionTerminal FormPeak Reflow Temperature (Cel)Number of FunctionsSupply VoltageTerminal PitchReflow Temperature-Max (s)Base Part NumberPin CountJESD-30 CodeOutput TypePower SuppliesNumber of BitsSupply Current-MaxArchitectureConverter TypeReference TypeData InterfaceDifferential OutputVoltage - Supply, AnalogVoltage - Supply, DigitalSettling TimeLinearity Error-Max (EL)Input Bit CodeINL/DNL (LSB)Input FormatNumber of D/A ConvertersAnalog Output Voltage-MaxLengthRoHS StatusContact PlatingNumber of PinsPbfree CodeMax Power DissipationPolarityInterfaceMax Supply VoltageMin Supply VoltagePower DissipationMax Output VoltageMin Input VoltageSlew RateMax Input VoltageSupply TypeResolutionSampling RateMin Output VoltageIntegral Nonlinearity (INL)Number of ConvertersConversion RateLead FreeMountMax Operating TemperatureMin Operating TemperatureTemperature GradeNumber of ChannelsView Compare
-
AD5300BRT-REELSurface MountSOT-23-6YES-40°C~105°CTape & Reel (TR)e0Obsolete1 (Unlimited)6EAR99Other ConvertersCMOSDUALGULL WING24013V0.95mm30AD53006R-PDSO-G6Voltage - Buffered3/5V80.25mAString DACD/A CONVERTERSupplySPI, DSPNo2.7V~5.5V2.7V~5.5V6μs0.3906%BINARY±1 (Max), ±0.25 (Max)SERIAL15.5V2.9mmNon-RoHS Compliant---------------------------
-
Surface MountSOT-23-6YES-40°C~105°CTape & Reel (TR)e0Obsolete1 (Unlimited)6EAR99Other ConvertersCMOSDUALGULL WING24013V0.95mm30AD53106-Voltage - Buffered3/5V100.25mAString DACD/A CONVERTERSupplySPI, DSPNo2.7V~5.5V2.7V~5.5V8μs0.39%BINARY±4 (Max), ±0.5 (Max)---2.9mmNon-RoHS CompliantLead, Tin6no1.25mWUnipolarSPI, Serial5.5V2.7V1.25mW5.5V2.7V1 V/μs5.5VSingle1.25 B167 ksps2.7V4 LSB1167 kspsContains Lead-----
-
Surface MountSOT-23-6--Cut Tape (CT)e0Obsolete1 (Unlimited)6EAR99Other ConvertersCMOSDUALGULL WING-13V0.95mm-AD53016-Voltage3/5V80.25mA-D/A CONVERTER--No--8 μs-BINARY---5.499V2.9mmNon-RoHS Compliant-6yes--2-Wire, I2C, Serial5.5V2.5V------1 B--1 LSB-167 ksps-Surface Mount105°C-40°CINDUSTRIAL1
-
Surface MountSOT-23-6YES-40°C~105°CTape & Reel (TR)e0Obsolete1 (Unlimited)6EAR99Other ConvertersCMOSDUALGULL WING22013V0.95mm30AD53106-Voltage - Buffered3/5V100.25mAString DACD/A CONVERTERSupplySPI, DSPNo2.7V~5.5V2.7V~5.5V8μs0.39%BINARY±4 (Max), ±0.5 (Max)SERIAL15.5V2.9mmNon-RoHS Compliant-6no--SPI--------1.25 B--4 LSB-167 ksps------
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
22 January 2024
LM317T Voltage Regulator: Functions, Usage, Applications and LM317T vs LM317
Ⅰ. Overview of LM317TⅡ. What functions does LM317T have?Ⅲ. Technical parameters of LM317T voltage regulatorⅣ. Circuit of LM317T voltage regulatorⅤ. What is the difference between LM317T and LM317?Ⅵ.... -
23 January 2024
IRF3205 MOSFET Specifications, Package, Working Principle and Applications
Ⅰ. Overview of IRF3205 MOSFETⅡ. Symbol, footprint and pin configuration of IRF3205 MOSFETⅢ. Specifications of IRF3205 MOSFETⅣ. Package of IRF3205 MOSFETⅤ. Working principle and structure of IRF3205 MOSFETⅥ.... -
23 January 2024
Get to Know the TDA2822M Audio Amplifier
Ⅰ. What is TDA2822M?Ⅱ. What are the features of TDA2822M?Ⅲ. Specifications of TDA2822MⅣ. Structure and working principle of TDA2822MⅤ. TDA2822M schematic diagramⅥ. What are the applications of TDA2822M?Ⅶ.... -
24 January 2024
ESP8266 Characteristics, Structure, Application Fields and Other Details
Ⅰ. What is ESP8266?Ⅱ. Characteristics of ESP8266 moduleⅢ. Hardware interface of ESP8266Ⅳ. Development method of ESP8266Ⅴ. Structure of ESP8266Ⅵ. What are the working modes of ESP8266?Ⅶ. What are...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.