ABB75DYFN

Share:

Sullins Connector Solutions ABB75DYFN

Part Number:

ABB75DYFN

Manufacturer:

Sullins Connector Solutions

Ventron No:

1178985-ABB75DYFN

Description:

CONN EDGE DUAL FMALE 150POS .050

ECAD Model:

Datasheet:

ABB75DYFN

Payment:

Payment

Delivery:

Delivery

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
  • One Stop Service

    One Stop Service

  • Competitive Price

    Competitive Price

  • Source Traceability

    Source Traceability

  • Same Day Delivery

    Same Day Delivery

Specifications

Sullins Connector Solutions ABB75DYFN technical specifications, attributes, parameters and parts with similar specifications to Sullins Connector Solutions ABB75DYFN.

  • Factory Lead Time
    3 Weeks
  • Contact Material

    Contact Material refers to the material used to make the electrical contacts in a component. It determines the electrical conductivity, durability, and resistance to corrosion and wear of the contacts. Common contact materials include copper, silver, gold, and alloys of these metals. The choice of contact material depends on the specific application and the required performance characteristics.

    Beryllium Copper
  • Mounting Type

    Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

    Surface Mount
  • Material - Insulation
    Polyphenylene Sulfide (PPS)
  • Mounting Option 1
    LOCKING
  • Operating Temperature

    Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.

    -65°C~150°C
  • Packaging
    Tube
  • Published
    2016
  • JESD-609 Code
    e3
  • Part Status

    Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

    Active
  • Moisture Sensitivity Level (MSL)

    Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

    1 (Unlimited)
  • Termination

    Termination refers to the electrical characteristics of a component or circuit at its input or output terminals. It describes how the component or circuit interacts with external signals or devices. Termination can involve matching impedance, providing voltage or current regulation, or filtering unwanted signals. Proper termination ensures efficient signal transfer, minimizes reflections, and prevents damage to components. It is crucial for maintaining signal integrity and optimizing circuit performance.

    Solder
  • Connector Type

    Connector Type refers to the physical interface used to connect an electronic component to other devices or systems. It specifies the shape, size, pin configuration, and mating mechanism of the connector. Common connector types include USB, HDMI, Ethernet, and power connectors. The choice of connector type depends on factors such as signal type, data rate, power requirements, and environmental conditions.

    CARD EDGE CONNECTOR
  • Number of Positions

    Number of Positions, in the context of electronic components, refers to the number of distinct terminals or connection points available on the component. It indicates the number of individual electrical connections that can be made to the component. A higher number of positions typically allows for more complex functionality and versatility in circuit design.

    150
  • Color
    Black
  • Number of Rows
    2
  • Gender
    Female
  • Subcategory
    Headers and Edge Type Connectors
  • Contact Type

    Contact Type refers to the physical construction and materials used in the electrical contacts of a component. It describes the type of connection made between two or more conductors.

    Cantilever
  • Pitch

    Pitch, in the context of electronic components, refers to the distance between the centers of adjacent pins or terminals on a component. It is typically measured in millimeters (mm) or inches (in). The pitch determines the spacing between components on a printed circuit board (PCB) and affects the overall size and layout of the board. A smaller pitch allows for more components to be placed on a given area, but it also increases the risk of shorts and other manufacturing defects.

    0.050 1.27mm
  • Total Number of Contacts
    150
  • Number of Conductors
    ONE
  • Reference Standard
    UL
  • Contact Finish
    Gold
  • Reliability
    COMMERCIAL
  • Body Length or Diameter
    3.99 inch
  • Number Of PCB Rows
    2
  • PCB Contact Pattern
    RECTANGULAR
  • Body Breadth
    0.37 inch
  • Body Depth
    0.61 inch
  • Rated Current (Signal)
    1A
  • Contact Resistance

    Contact resistance is the electrical resistance between two electrical contacts. It is caused by the imperfect contact between the two surfaces, which results in a small amount of resistance to the flow of current. Contact resistance can be a significant factor in the performance of electrical circuits, especially in high-power applications. It can cause power loss, heating, and even damage to components.

    30mOhm
  • Card Type

    Card Type refers to the physical form factor of an electronic card or module. It specifies the size, shape, and pin configuration of the card, allowing it to fit into specific slots or connectors on a printed circuit board (PCB) or backplane. Common card types include PCI, PCIe, ISA, and CompactPCI, each with its own unique dimensions, pinouts, and functionality. The Card Type parameter helps ensure compatibility between the card and the system it is intended for.

    Non Specified - Dual Edge
  • Read Out
    Dual
  • Insulation Resistance

    Insulation Resistance is a measure of the resistance of an insulating material to the flow of electric current. It is typically measured in megaohms (MΩ) or gigohms (GΩ). A high insulation resistance indicates that the material is a good insulator, while a low insulation resistance indicates that the material is a poor insulator. Insulation resistance is important for preventing electrical leakage and ensuring the safe operation of electrical equipment.

    5000000000Ohm
  • Number of Positions/Bay/Row
    75
  • Durability
    500 Cycles
  • Insertion Force-Max
    1.668 N
  • Withdrawl Force-Min
    .139 N
  • Contact Finish Thickness
    10.0μin 0.25μm
  • Plating Thickness
    10μin
  • Card Thickness
    0.062 1.57mm
  • RoHS Status
    ROHS3 Compliant

Description

ABB75DYFN Overview
Material was packaged according to Tube's specifications.It's best to mount type Surface Mount.Devices are connected through connector sockets CARD EDGE CONNECTOR.

ABB75DYFN Features


ABB75DYFN Applications
There are a lot of Sullins Connector Solutions
ABB75DYFN Edgeboard Connectors applications.


RADAR processing, digital oscilloscopes
CMOS Image sensors for mobile applications
Medical Instrumentation and medical imaging
Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
ABB75DYFN More Descriptions
CONN EDGE DUAL FML 150POS 0.050

Product Comparison

The three parts on the right have similar specifications to ABB75DYFN.
  • Image
    Part Number
    Manufacturer
    Factory Lead Time
    Contact Material
    Mounting Type
    Material - Insulation
    Mounting Option 1
    Operating Temperature
    Packaging
    Published
    JESD-609 Code
    Part Status
    Moisture Sensitivity Level (MSL)
    Termination
    Connector Type
    Number of Positions
    Color
    Number of Rows
    Gender
    Subcategory
    Contact Type
    Pitch
    Total Number of Contacts
    Number of Conductors
    Reference Standard
    Contact Finish
    Reliability
    Body Length or Diameter
    Number Of PCB Rows
    PCB Contact Pattern
    Body Breadth
    Body Depth
    Rated Current (Signal)
    Contact Resistance
    Card Type
    Read Out
    Insulation Resistance
    Number of Positions/Bay/Row
    Durability
    Insertion Force-Max
    Withdrawl Force-Min
    Contact Finish Thickness
    Plating Thickness
    Card Thickness
    RoHS Status
    Mount
    Feature
    Pbfree Code
    Lead Free
    ECCN Code
    HTS Code
    Flange Feature
    View Compare
  • ABB75DYFN
    ABB75DYFN
    3 Weeks
    Beryllium Copper
    Surface Mount
    Polyphenylene Sulfide (PPS)
    LOCKING
    -65°C~150°C
    Tube
    2016
    e3
    Active
    1 (Unlimited)
    Solder
    CARD EDGE CONNECTOR
    150
    Black
    2
    Female
    Headers and Edge Type Connectors
    Cantilever
    0.050 1.27mm
    150
    ONE
    UL
    Gold
    COMMERCIAL
    3.99 inch
    2
    RECTANGULAR
    0.37 inch
    0.61 inch
    1A
    30mOhm
    Non Specified - Dual Edge
    Dual
    5000000000Ohm
    75
    500 Cycles
    1.668 N
    .139 N
    10.0μin 0.25μm
    10μin
    0.062 1.57mm
    ROHS3 Compliant
    -
    -
    -
    -
    -
    -
    -
    -
  • ABB70DHNR
    3 Weeks
    Beryllium Copper
    Through Hole
    Polyphenylene Sulfide (PPS)
    -
    -65°C~150°C
    Tube
    2014
    e3
    Active
    Not Applicable
    Solder
    Hairpin Bellows
    140
    Black
    2
    Female
    -
    Hairpin Bellows
    0.050 1.27mm
    -
    -
    -
    Gold
    -
    -
    -
    -
    -
    -
    -
    -
    Non Specified - Dual Edge
    Dual
    -
    70
    -
    -
    -
    10.0μin 0.25μm
    -
    0.062 1.57mm
    ROHS3 Compliant
    Through Hole
    Board Lock
    yes
    Lead Free
    -
    -
    -
  • ABB75DHFD
    3 Weeks
    Beryllium Copper
    Surface Mount
    Polyphenylene Sulfide (PPS)
    -
    -65°C~150°C
    Tube
    2014
    e3
    Active
    Not Applicable
    Solder
    Hairpin Bellows
    150
    Black
    2
    Female
    -
    Hairpin Bellows
    0.050 1.27mm
    -
    -
    -
    Gold
    -
    -
    -
    -
    -
    -
    -
    -
    Non Specified - Dual Edge
    Dual
    -
    75
    -
    -
    -
    10.0μin 0.25μm
    -
    0.062 1.57mm
    ROHS3 Compliant
    Surface Mount
    -
    yes
    Lead Free
    EAR99
    8536.69.40.40
    Flush Mount, Top Opening, Unthreaded, 0.125 (3.18mm) Dia
  • ABB70DHHN
    3 Weeks
    Beryllium Copper
    Through Hole
    Polyphenylene Sulfide (PPS)
    -
    -65°C~150°C
    Tube
    2014
    e3
    Active
    Not Applicable
    Solder, Staggered
    Hairpin Bellows
    140
    Black
    2
    Female
    -
    Hairpin Bellows
    0.050 1.27mm
    -
    -
    -
    Gold
    -
    -
    -
    -
    -
    -
    -
    -
    Non Specified - Dual Edge
    Dual
    -
    70
    -
    -
    -
    10.0μin 0.25μm
    -
    0.062 1.57mm
    ROHS3 Compliant
    Through Hole
    -
    yes
    Lead Free
    -
    -
    -

Certification

  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News