Share:

IDT, Integrated Device Technology Inc 7006L35J8

Name: 7006L35J8
Brand: IDT, Integrated Device Technology Inc
SKU: 3724259-7006L35J8
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: 7006L35J8

Manufacturer:: IDT, Integrated Device Technology Inc

Ventron No:: 3724259-7006L35J8

Description:: IC SRAM 128KBIT 35NS 68PLCC

ECAD Model:

Datasheet:: IDT Suffixes

Payment:

Delivery:

Part Overview

Description
The IDT7006S/L is a high-speed 16K x 8 dual-port static RAM with true dual-ported memory cells that allow simultaneous reads of the same memory location. It features low-power operation, with active power consumption of 750mW (typ.) for the IDT7006S and 700mW (typ.) for the IDT7006L, and standby power consumption of 5mW (typ.) for the IDT7006S and 1mW (typ.) for the IDT7006L.

Features
True dual-ported memory cells
High-speed access:
Commercial: 15/17/20/25/35/55ns (max.)
Industrial: 20ns (max.)
Military: 20/25/35/55/70ns (max.)
Low-power operation
On-chip port arbitration logic
Full on-chip hardware support of semaphore signaling between ports
Fully asynchronous operation from either port
Withstands greater than 2001V electrostatic discharge
Battery backup operation - 2V data retention
TTL-compatible, single 5V (±10%) power supply
Available in 68-pin PGA, quad flatpack, PLCC, and a 64-pin TQFP
Industrial temperature range (-40°C to 85°C) available for selected speeds
Green parts available

Applications
Shared memory systems
Multiprocessor systems
Data acquisition systems
Image processing systems
Telecommunications systems

Specifications

IDT, Integrated Device Technology Inc 7006L35J8 technical specifications, attributes, parameters and parts with similar specifications to IDT, Integrated Device Technology Inc 7006L35J8.

Mounting Type
Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.
Surface Mount
Package / Case
Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.
68-LCC (J-Lead)
Operating Temperature
Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.
0°C~70°C TA
Packaging
Tape & Reel (TR)
Part Status
Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.
Obsolete
Moisture Sensitivity Level (MSL)
Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.
3 (168 Hours)
Technology
Technology, in the context of electronic components, refers to the specific manufacturing process and materials used to create the component. It encompasses the semiconductor fabrication techniques, such as the type of transistor used (e.g., MOSFET, BJT), the gate oxide thickness, and the interconnect materials. Technology also includes the packaging type, such as surface mount or through-hole, and the leadframe or substrate material. The technology used impacts the component's performance characteristics, such as speed, power consumption, and reliability.
SRAM - Dual Port, Asynchronous
Voltage - Supply
4.5V~5.5V
Base Part Number
IDT7006
Memory Size
128Kb 16K x 8
Memory Type
Memory Type refers to the type of memory technology used in an electronic device. It indicates the specific design and architecture of the memory, such as DRAM (Dynamic Random Access Memory), SRAM (Static Random Access Memory), ROM (Read-Only Memory), EEPROM (Electrically Erasable Programmable Read-Only Memory), or Flash memory. Each memory type has unique characteristics, including speed, capacity, volatility, and cost, which determine its suitability for different applications.
Volatile
Memory Format
Memory Format refers to the arrangement and organization of data within a memory device. It specifies the number of bits, bytes, or words stored in each memory location and how they are accessed.
SRAM
Memory Interface
Parallel
Write Cycle Time - Word, Page
35ns
RoHS Status
Non-RoHS Compliant