Taiyo Yuden
FIXED IND 2.2UH 1.9A 117 MOHM
Ⅰ. Description of STM32F103ZET6
Ⅱ. Naming rules of STM32F103ZET6
Ⅲ. What are the characteristics of STM32F103ZET6?
Ⅳ. How to optimize the program performance of STM32F103ZET6?
Ⅴ. Highlights of STM32F103ZET6
Ⅵ. Minimum system of STM32F407ZET6
Ⅶ. What is the difference between STM32F407ZET6 and STM32F407VET6?
STM32F103ZET6 is a microcontroller based on the ARM Cortex™-M3 core produced by STMicroelectronics. The chip has the characteristics of low power consumption, high performance, and rich peripheral resources, and is suitable for medical equipment, communication equipment, automotive electronics, industrial control and other fields. This article will introduce the specific information of STM32F103ZET6 in terms of naming rules, features and highlights.
The STM32F103ZET6 is a microcontroller based on the ARM Cortex-M3 core and is widely used in embedded system development. The microcontroller contains a high-performance ARM Cortex-M332-bit RISC core running at 72MHz, high-speed embedded memory (up to 512KB Flash, up to 64KB SRAM), and a wide range of enhanced I/O and peripherals connected to two APB buses . It provides two PWM timers, three 12-bit ADCs and four general-purpose 16-bit timers, as well as standard and advanced communication interfaces: one USB, one CAN, one SDIO, two I²C, two I2Ss, three SPI and Five USARTs. The microcontroller operates over the –40°C to +105°C temperature range and operates from a 2 V to 3.6 V supply voltage. STM32F103ZET6 is suitable for a variety of application scenarios, such as scanners, printers, PLCs, inverters, motor drives, application controls, GPS platforms, PC and gaming peripherals, medical and handheld devices, and alarm systems, video intercoms, and HVAC systems.
Alternatives and equivalents:
• STM32F103ZET7TR
This model consists of 7 parts, and their naming rules are as follows:
1. “STM32”: “STM32” represents a 32-bit microcontroller with ARM Cortex-M3 core.
2. “F”: “F” stands for chip sub-series.
3. “103”: “103” represents the enhanced series.
4. “Z”: “Z” represents the number of pins. Among them, “T” represents 36 feet, “C” represents 48 feet, “R” represents 64 feet, “V” represents 100 feet, and “Z” represents 144 feet.
5. “E”: “E” represents the embedded Flash capacity. Among them, “6” represents 32K bytes Flash, “8” represents 64K bytes Flash, “B” represents 128K bytes Flash, “C” represents 256K bytes Flash, “D” represents 384K bytes Flash, and “E” represents 512K bytes Flash.
6. “T”: “T” represents packaging. Among them, “H” represents BGA packaging, “T” represents LQFP packaging, and “U” represents VFQFPN packaging.
7. “6”: “6” represents the operating temperature range. Among them, “6” represents -40°C to 85°C, and “7” represents -40°C to 105°C.
Here are some of the key features of this microcontroller:
1. Development tool support: STMicroelectronics provides a wealth of development tools and software support, including STM32Cube software packages, integrated development environments (IDEs), routines, drivers, etc., to accelerate the product development and debugging process.
2. Power management: The microcontroller provides a variety of low-power modes, which can adjust power consumption according to needs, extend battery life or save energy.
3. Security: For data security and system security, the microcontroller provides a hardware encryption engine and memory that supports code execution protection to protect critical data and systems from unauthorized access.
4. Memory: STM32F103ZET6 has 128KB Flash program memory and 64KB SRAM data memory, which can meet the storage needs of most applications.
5. Core: STM32F103ZET6 is based on the ARM Cortex-M3 core and the operating frequency can reach up to 72MHz. It has strong computing power and low power consumption design.
6. Peripheral interfaces: STM32F103ZET6 provides a variety of peripheral interfaces, including multiple serial communication interfaces (USART, SPI, I2C, etc.), general-purpose timers/counters, analog-to-digital converters (ADC), PWM outputs, etc., which make it easy to communicate and connect with other devices.
Here are several ways to optimize the program performance of STM32F103ZET6:
1. Interrupt service program optimization
Reducing the execution time of the interrupt service program is the key. First, we should remove unnecessary code and function calls in the interrupt service routine, leaving only the core logic directly related to interrupt processing. This helps reduce the size and complexity of the interrupt service routine, thereby shortening its execution time. In addition, we need to configure the interrupt priority according to the importance and urgency of the task to ensure that key tasks can be processed first.
2. DMA (direct memory access) transmission
For the transmission of large amounts of data, using DMA can significantly improve performance. When a peripheral needs to send or receive data, it makes a request to the DMA controller. After receiving the request, the DMA controller will take over the task of data transmission, directly reading data from the memory and writing it to the peripheral device, or reading data from the peripheral device and writing it to the memory. The entire process is completely completed by the DMA controller independently without the involvement of the CPU.
3. Reduce loops and conditional judgments
Try to reduce the number of loops and conditional judgments, especially in interrupt service routines or codes with high real-time requirements. In order to improve the execution efficiency of the code, we can also consider using the lookup table method to replace complex calculations. The look-up table method is a method of pre-calculating and storing results. It directly obtains the required results by looking up tables, avoiding complex calculations at runtime.
4. Choose appropriate algorithms and data structures
We can use efficient algorithms and appropriate data structures to reduce the amount of calculation and memory consumption. For example, we can choose to use quick sort instead of bubble sort; or, when needed, we can choose data structures that take up less memory. Such a choice can significantly improve the execution efficiency of the program and optimize resource utilization.
1. Wide application fields
STM32F103ZET6 is widely used in various fields, providing strong support for engineers and makers. In the field of automotive electronics, it can be used in vehicle electronic control units (ECUs), vehicle entertainment systems and other applications to improve the performance and driving experience of the car. In the field of robotics, it can be used for robot control, sensor data processing and other applications to achieve intelligent and autonomous operation of robots. In the field of industrial control, it can be used in applications such as PLC (programmable logic controller), industrial automation and process control to achieve efficient data collection and control. In the field of smart home, it can be used for smart door locks, smart lighting control, smart temperature control and other applications, helping us achieve a smarter and more convenient home life.
2. Rich development resources and tool support
For STM32F103ZET6, STMicroelectronics provides rich development resources and tool support. First of all, the official provides complete development documents and routines to help developers quickly get started and develop applications. Secondly, ST also provides a powerful integrated development environment (IDE) - STM32CubeIDE, which integrates code editing, debugging, compilation and other functions, providing developers with a convenient development environment. In addition, ST Company also provides a wealth of peripheral driver libraries and software packages, which can quickly implement various functions and greatly improve development efficiency.
3. Powerful performance and rich resources
STM32F103ZET6 is equipped with an ARM Cortex-M3 core with a main frequency of up to 72MHz, which can handle complex tasks and real-time operations. At the same time, it also has 512KB Flash memory and 64KB SRAM, providing sufficient storage space for your projects. In addition, it also supports a variety of peripheral interfaces, such as UART, SPI, I2C, CAN, etc., to meet various communication needs. Not only that, it also has multiple timers and PWM output channels, which can achieve precise timing and PWM control, bringing more possibilities to your applications.
The minimum system, or minimum application system, refers to a system that can work with a single-chip microcomputer composed of the fewest components. The minimum system is mainly composed of five major parts: debugging, reset, power supply, clock, and control chip.
1. Debug interface
During program development, we usually need to download the bin/hex file and perform online simulation debugging. When performing these operations, we can use SWD or JTAG. Compared with JTAG, SWD mode shows higher reliability in high-speed mode, and it only requires 4 pins. Therefore, in actual development, SWD is generally used for operation.
2. Reset circuit
The main control chip adopts a low-level reset mode, and the pin NRST is responsible for the reset operation. Hardware key reset is a method of system reset, which also includes software reset and watchdog count termination reset. In the key circuit, the main function of the capacitor is to debounce the key, ensuring that there will be no level jitter when the key is just contacted or released, thereby avoiding the occurrence of malfunctions.
3. Power circuit
Through the LDO (Low Dropout Regulator) low dropout linear voltage regulator, we can convert the 5V voltage to 3.3V to provide a stable power supply for the main control chip.
4. Clock circuit
The crystal oscillator is made of quartz crystal. The reason why quartz crystals can be used as oscillators is based on the principle of their piezoelectric effect: when an electric field is applied to the two poles of the crystal, the crystal is mechanically deformed. In particular, when the frequency of the applied alternating voltage matches the natural frequency of the wafer (this frequency is determined by the size and shape of the wafer), the amplitude of the mechanical vibration will increase sharply. This phenomenon is called "piezoelectric resonance". Crystal oscillators can be divided into passive crystal oscillators and active crystal oscillators, but they are essentially based on the working principle of the Pierce oscillator circuit.
STM32F407ZET6 and STM32F407VET6 are two microcontrollers from STMicroelectronics, both belonging to the STM32F4 series. They have similar features and performance, but there are some differences in some aspects.
1. Pin assignment
The STM32F407ZET6 has more pins, which makes it possible to show greater flexibility when connecting peripherals. However, this also means that more PCB space needs to be reserved for it in the design. Relatively speaking, STM32F407VET6 may be more suitable when PCB space is limited due to its more compact package.
2. Package type
STM32F407ZET6 uses the LQFP (Low-profile Quad Flat Package) packaging form, which is more common and has more pins to facilitate the connection of peripheral devices. It is especially suitable for application scenarios that require more pins. The STM32F407VET6 uses a TFBGA (Thin Fine-Pitch Ball Grid Array) package, which is more compact and has a higher pin density, making it suitable for applications with strict space constraints.
Frequently Asked Questions
1. What is STM32F407 used for?
The low power consumption of STM32F407 makes it suitable as the core processing unit of IoT devices such as sensors and controllers. In fields such as CNC machine tools and industrial robots, STM32F407 can be responsible for system control, data acquisition and processing, and communication with peripheral devices.
2. What is the replacement and equivalent of STM32F407ZET6?
You can replace the STM32F407ZET6 with STM32F103ZET6TR, STM32F407ZET7 or STM32F103ZET7TR.
3. What development tools are available for the STM32F407ZET6?
STMicroelectronics provides a comprehensive set of development tools for the STM32F407ZET6, including evaluation boards, debuggers, and software development kits (SDKs). Additionally, third-party vendors offer a range of development tools and accessories tailored for STM32 microcontrollers.