Add to Favorites

공유하다:

Samtec Inc. DW-01-07-F-S-236

부품 번호:: DW-01-07-F-S-236

제조업체:: Samtec Inc.

Ventron 숫자:: 1634605-DW-01-07-F-S-236

설명:: .025" BOARD SPACERS

ECAD 모델:

데이터시트:: DW-01-07-F-S-236

지불:

배달:

원스톱 서비스
경쟁력있는 가격
소스 추적성
당일 배송

명세서

Samtec Inc. DW-01-07-F-S-236 기술 사양, 속성, 매개변수 및 유사한 사양을 가진 부품 Samtec Inc. DW-01-07-F-S-236.

Factory Lead Time
3 Weeks
Contact Material
Contact Material refers to the material used to make the electrical contacts in a component. It determines the electrical conductivity, durability, and resistance to corrosion and wear of the contacts. Common contact materials include copper, silver, gold, and alloys of these metals. The choice of contact material depends on the specific application and the required performance characteristics.
PHOSPHOR BRONZE
Mount
Through Hole
Mounting Type
Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.
Through Hole
Packaging
Bulk
Series
Series, in the context of electronic components, refers to the arrangement of components in a circuit. When components are connected in series, they form a single path for current to flow through. The total resistance of a series circuit is the sum of the individual resistances of each component. Series connections are often used to control the flow of current in a circuit, as the total resistance can be adjusted by changing the number or type of components in the series.
Flex Stack, DW
Published
2015
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.
Active
Moisture Sensitivity Level (MSL)
Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.
Not Applicable
Termination
Termination refers to the electrical characteristics of a component or circuit at its input or output terminals. It describes how the component or circuit interacts with external signals or devices. Termination can involve matching impedance, providing voltage or current regulation, or filtering unwanted signals. Proper termination ensures efficient signal transfer, minimizes reflections, and prevents damage to components. It is crucial for maintaining signal integrity and optimizing circuit performance.
Solder
Connector Type
Connector Type refers to the physical interface used to connect an electronic component to other devices or systems. It specifies the shape, size, pin configuration, and mating mechanism of the connector. Common connector types include USB, HDMI, Ethernet, and power connectors. The choice of connector type depends on factors such as signal type, data rate, power requirements, and environmental conditions.
BOARD STACKING CONNECTOR
Number of Positions
Number of Positions, in the context of electronic components, refers to the number of distinct terminals or connection points available on the component. It indicates the number of individual electrical connections that can be made to the component. A higher number of positions typically allows for more complex functionality and versatility in circuit design.
1
Color
Black
Number of Rows
1
Gender
Male
MIL Conformance
NO
DIN Conformance
NO
IEC Conformance
NO
Filter Feature
NO
Mixed Contacts
NO
Option
GENERAL PURPOSE
Total Number of Contacts
1
Mating Information
MULTIPLE MATING PARTS AVAILABLE
Contact Finish - Post (Mating)
Gold
Length - Stack Height
0.236 5.994mm
Length - Overall Pin
0.430 10.922mm
Length - Post (Mating)
0.084 2.134mm
Contact Finish Thickness - Post (Mating)
3.00μin 0.076μm
Length - Tail
0.110 2.794mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant

설명

DW-01-07-F-S-236 Overview
This product is packaged in a BOARD STACKING CONNECTOR box.Through Hole indicates that the device is mounted.An Bulk case is utilized for packaging the product.The product is a part of the Flex Stack, DW Series.

DW-01-07-F-S-236 Features
Flex Stack, DW series

DW-01-07-F-S-236 Applications
There are a lot of Samtec Inc.
DW-01-07-F-S-236 Rectangular Connectors applications.

Embedded systems
Datacom
Communication
Medical technology
Military Technology
Measuring & Control Technology
Instrumentation
Automotive Electronics
Telecommunications
Data Technology

DW-01-07-F-S-236 More Descriptions

Conn Board Stacker HDR 1 POS Solder ST Thru-Hole
Board to Board & Mezzanine Connectors
CONN HDR 1POS STACK T/H GOLD

공유하다:

Samtec Inc. DW-01-07-F-S-236

부품 번호:

제조업체:

Ventron 숫자:

설명:

ECAD 모델:

데이터시트:

지불:

배달:

빠른 견적 요청

원스톱 서비스

경쟁력있는 가격

소스 추적성

당일 배송

명세서

Samtec Inc. DW-01-07-F-S-236 기술 사양, 속성, 매개변수 및 유사한 사양을 가진 부품 Samtec Inc. DW-01-07-F-S-236.

설명

인증

관련 부품 DW-01-07-F-S-236

최신 뉴스